B.L. Enterprises PBR and DER (Print Buffer and Disk Emulator Cartridges)
- Type
- Peripheral
- Category
- Cartridge-and-cable kits that turn a spare Atari into a print buffer or RAM disk
- Manufacturer
- B.L. Enterprises (Louisville, Kentucky)
Overview
By the late 1980s many Atari owners had a second machine in a cupboard: an old 800 kept after buying an XL, or a used 400 or XL picked up for under $100. B.L. Enterprises of Louisville, Kentucky sold two kits to put that machine to work. Each kit has a cartridge for the spare computer, a cable and support software:
- PBR, the Print Buffer Routine, turns the second computer into a printer buffer of just under 40K.
- DER, the Disk Emulator Routine, turns it into a RAM disk that the main computer sees as an ordinary SIO disk drive.
Antic reviewed both in November 1988 at $39.95 each, and ANALOG Computing covered them in issue 65. David Paterson's 1996 hardware FAQ compares them to Lee Brilliant's earlier ANALOG project, the "Atari Zucchini": plans and software that turned a surplus Atari into a printer buffer for another one. B.L. sold the same idea as a ready-made product.
DER: a second Atari as a disk drive
| Item | Detail |
|---|---|
| Connection | A special SIO cable; the DER computer must be the last device on the chain |
| Drive number | Configurable as D1: to D8:, and the main computer can boot from it |
| Capacity | 293 sectors from a 48K computer, 403 from 64K, 914 from a 128K 130XE |
| Speed | Faster than a floppy, but limited by the SIO port's 19,200 baud, so slower than a built-in RAM disk |
| Persistence | Keeps its contents when the main computer is switched off, but not when the DER computer is |
| DOS | B.L. recommended Atari DOS 2.5. Antic found MYDOS and DOS XL also worked, but TopDOS, SpartaDOS and SuperDOS didn't. The maker said a newer version supported SpartaDOS, DOS XL and SmartDOS |
The package included three extras: a quick Translator that copies the OS out of a 400/800 DER machine to give an XL/XE main computer the old OS, a sector copier that uses the memory of both machines, and a routine to move DUP.SYS and MEM.SAV onto the DER drive. Antic's Charles Cherry gave DER "an enthusiastic recommendation".
PBR: a second Atari as a print buffer
PBR connects the two computers through their joystick ports. The printer hangs off the second machine. Your program "prints" at full speed into the buffer and carries on, while the buffer feeds the printer, and several files can be queued. The console keys on the buffer computer send a form feed, a single or double line feed, or abort and clear the buffer.
The catch was set-up. The main computer has to be told to send printer output to the joystick port instead of SIO, which means loading a small driver before your application. On an XL/XE you first run the Translator or FIX-XL to free 4K for the driver, then load the PBR software, then boot your program: three disks before you print. On a 400/800 it was harder still and less compatible. Cherry's verdict was a "more reserved" recommendation, with a wish for pause, restart and multiple-copy commands.
Requirements
Both products need two 48K Atari computers and one disk drive. Using both at once takes three computers.
Today
The idea is still useful. A spare XL or 130XE running DER is a fast, silent "drive" on real hardware. Modern devices such as SIO2PC, SDrive and FujiNet give far more capacity and keep data at power-off. For similar ideas see CSS Multiplexer, which links several computers over the cartridge port, and the cable-based Atari-to-Atari links.
Credits
- Picture: The DER and PBR cartridges, as pictured in Antic, November 1988. — Product photo from Antic, November 1988 (atarimagazines.com)
- Antic Vol. 7 No. 7 (November 1988), 8-Bit Toolhouse: Disk Emulator (Charles Cherry) — Product photo from Antic, November 1988 (atarimagazines.com), 1988
- David A. Paterson, Atari 8-bit Hardware Upgrade FAQ v0.2 (1996), Zucchini / PBR / DER entry — David A. Paterson, 1996
