Atari DOS 2.5
- Medium
- Disk
- Year
- 1985
- Publisher
- Atari Corp.
- Type
- DOS
- Category
- Disk operating system (menu-driven)
- Developer
- Optimized Systems Software (Bill Wilkinson) for Atari
- Language
- 6502 machine language
- Requirements
- Any Atari 8-bit with an 810, 1050 or compatible drive; enhanced density needs a 1050; RAM disk needs a 130XE or compatible banked memory
- Tags
- dos, atari-corp, oss, disk, 1050, enhanced-density, ramdisk, 130xe, menu
Overview
Atari DOS 2.5 is the DOS that finally gave owners of the Atari 1050 drive the extra capacity they had paid for without breaking compatibility. It keeps the DOS 2.0S menu almost unchanged, reads and writes ordinary single-density DOS 2 disks, and adds the 1050's enhanced (or "dual") density mode: 26 sectors per track instead of 18, giving 1010 free sectors (about 126K) per disk, roughly 43% more than DOS 2.0S. It also introduced a RAM disk for the new 130XE.
Atari shipped DOS 2.5 (disk DX5075) with 1050 drives from autumn 1985 into early 1986, and later with XF551 drives in 1987–88. It was offered free to owners of the unpopular DOS 3, who could send in their DOS 3 master disk for an exchange. For many owners of an XE computer and a 1050 it is simply "DOS".
What changed from DOS 2.0S
The menu has just one new item, P. FORMAT SINGLE:
DISK OPERATING SYSTEM II VERSION 2.5
COPYRIGHT 1984 ATARI CORP.
A. DISK DIRECTORY I. FORMAT DISK
B. RUN CARTRIDGE J. DUPLICATE DISK
C. COPY FILE K. BINARY SAVE
D. DELETE FILE(S) L. BINARY LOAD
E. RENAME FILE M. RUN AT ADDRESS
F. LOCK FILE N. CREATE MEM.SAV
G. UNLOCK FILE O. DUPLICATE FILE
H. WRITE DOS FILES P. FORMAT SINGLE
On a 1050, I formats in enhanced density and P forces a single-density disk that an 810 can read. Other differences:
- An empty enhanced-density disk shows "999+ FREE SECTORS" because the directory only has room for three digits. The real figure is 1010.
- J (Duplicate Disk) now formats the destination disk before copying.
- 810 owners can still boot a DOS 2.5 disk written in single density. If a 1050 user fills an enhanced disk, any file that runs past sector 720 is shown in the directory with angle brackets, for example
<FILE2.BAS>. Those files are out of reach of an 810.
The enhanced format keeps the DOS 2 layout (VTOC at sector 360, directory at 361–368, 64 files per disk) and adds a second bitmap at sector 1024 for sectors 720–1023.
The extra utilities
Rather than enlarge the menu, OSS put the new tools on the master disk as separate binary files:
| File | What it does |
|---|---|
RAMDISK.COM |
On a 130XE (or compatible banked memory) it creates a 64K RAM disk as D8:, then copies DUP.SYS and MEM.SAV there so going to DOS is almost instant. |
SETUP.COM |
Changes the default drive, number of active drives (1–4), number of open files (1–7) and write-verify, with no POKEs. It also builds an AUTORUN.SYS that loads the 850 R: handler and/or runs a BASIC program at boot. |
COPY32.COM |
Copies files from DOS 3 disks to DOS 2.5 or 2.0S disks, the escape route for anyone stuck with DOS 3. |
DISKFIX.COM |
Can un-erase a file (if it has not been overwritten), check every file on a disk, and rename a file by number to sort out duplicate names. |
RAMDISK.COM runs automatically if it is on the boot disk, before any AUTORUN.SYS. The RAM disk holds 499 sectors. With DUP.SYS and MEM.SAV on it, a 130XE user can type DOS and get the menu back in a moment without losing a BASIC program.
Behind the scenes
DOS 2.5 was written for Atari by Optimized Systems Software, led by Bill Wilkinson, the people behind Atari BASIC, DOS 2.0S's file manager, BASIC A+, BASIC XL, DOS XL and Action!. Antic's July 1985 DOS survey welcomed it as the coming "official" Atari DOS and judged its performance-to-price ratio (very good for nothing) hard to beat. The same writer regretted that there was not yet a sector editor that understood the enhanced format.
Users soon extended it. In February 1986 Antic published Patrick Dell'Era's replacement RAMDISK.COM for 800 owners with an Axlon 128K board, giving 710 free RAM-disk sectors. Germany's Turbo-DOS XL/XE was later built partly on DOS 2.5 source licensed from Atari.
Compatibility notes
- The memory locations used to configure DOS 2.0S still work: 1802 is the drive map and 1801 the number of open files. With the RAM disk active, 1802 defaults to 131 (drives 1, 2 and 8).
- Software that needs exactly DOS 2.0S's memory layout generally runs under 2.5.
- MyDOS 4.x reads DOS 2.5 enhanced disks but writes only the first 720 sectors of them. SpartaDOS 3.2 reads them, and SuperDOS and others support them fully.
- DOS 2.5 cannot use true double density (256-byte sectors). Owners of doubled 1050s, Indus GTs or XF551s in double density need MyDOS, SpartaDOS or similar.
Using it today
DOS 2.5 is a good default for emulators and SD-card drive emulators: boot a DOS 2.5 image, format enhanced-density (130K) or single-density (90K) ATR images, and nearly all classic disk software will be at home. On a real or emulated 130XE, keep RAMDISK.COM on the boot disk for a fast D8:. To make a BASIC program run at power-up, use SETUP.COM to build the AUTORUN.SYS rather than writing one by hand.
Credits
- Picture: The DOS 2.5 master disk, part number DX5075. — Disk scan from AtariMania (Fair use (packaging/screenshot for identification))
- comp.sys.atari.8bit FAQ (Michael Current) — 7.3.1 What is Atari DOS? — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 4 No. 3 (July 1985) — Everything You Wanted to Know About Every D.O.S., Eric Clausen — AtariMagazines.com (Kevin Savetz), 1985
- Antic Vol. 6 No. 10 (Feb 1988) — First-Time Atari Users Handbook, Gregg Pearlman — AtariMagazines.com (Kevin Savetz), 1988
- Antic Vol. 4 No. 10 (Feb 1986) — DOS 2.5 for Axlon RAMdisk, Patrick Dell'Era — AtariMagazines.com (Kevin Savetz), 1986
- AtariMania — DOS 2.5 — Disk scan from AtariMania (Fair use (packaging/screenshot for identification))
