Atari 400/800 Internal Boards (Field Service View)
- Year
- 1979
- Type
- Component
- Category
- Internal architecture: motherboard, CPU, personality, RAM and power boards
- Manufacturer
- Atari, Inc.
- Tags
- atari-inc, atari-400, atari-800, field-service, motherboard, cpu-board, personality-board, ram-board, power-supply, memory-map, service, internals
- Related
- Atari 1200XL Internals (Field Service View), Atari 400/800 Field Service Testing: SALT II, Symptom Checklist and Controllers, Atari 600XL Internals (Field Service View), Atari 400/800 Memory and Personality Modules (CX852, CX853, CX801, 400 48K Kit), The Atari 8-bit Timeline, 1977–1992, Colleen and Candy: How the Atari 400 and 800 Were Born
Overview
Later Ataris put everything on one board. The 400 and 800 are built from plug-in modules, like a minicomputer. Atari's 400/800 Home Computer Field Service Manual (June 1982) describes seven major functional modules:
- Motherboard
- Central Processing Unit (CPU) board
- ROM Personality board (Operating System), on the 800 only
- RAM board(s)
- Keyboard
- Power Supply board
- Program cartridge
The boards plug into sockets on the motherboard, which carries a common 16-line address bus, 8-line data bus, clock lines and the power rails. The keyboard connects by ribbon cable. The manual's design is the reason the 800 is so easy to expand and repair: swap a board and you have changed the OS, the memory or even the CPU.
The modules
| Module | What it contains | What it does |
|---|---|---|
| Motherboard | 400: POKEY (A101), PIA (A102), the OS ROMs (A103–A105), two 4051 keyboard multiplexers, memory map decoder. 800: POKEY, PIA, keyboard muxes, I/O decoder, 74LS243 data buffers, both cartridge sockets, CPU, personality and three RAM sockets | Makes the 3.58 MHz master clock and power-on reset, drives the keyboard speaker, reads the controllers, buffers the data bus, decodes memory into 8K blocks, mixes video into composite, mixes computer sound with the cassette audio track and makes the TV sound subcarrier |
| CPU board | 6502 (A303), CTIA or GTIA (A301), ANTIC (A302), tri-state address buffers (Z303, Z304), clock generator (Z302A/B) | Generates the φ1/φ2 system clocks from the master clock, issues the refresh signal for the dynamic RAM at least every 2 ms, reads the four joystick triggers and the four console keys, and produces the video signals |
| ROM Personality board (800) | Two 4K ROMs (A401, A403) and one 2K ROM (A402) | Holds the OS at $D800–$FFFF: the 4K chips hold the I/O subsystem, interrupt handling and initialisation, and the 2K chip the floating-point package. It also generates chip-select signals for the LSI chips and the data buffers |
| RAM board | Dynamic RAM in 8K or 16K versions | Each chip has only seven address lines, so a 14-bit address is multiplexed: low seven bits as the row address, high seven as the column |
| Keyboard | 57 normally open switches | Scanned rapidly; the scan pattern goes to POKEY for encoding |
| Power supply board | Regulators, power switch, interlock switch, RF modulator; on the 800 also the monitor jack and the four console keys | Turns 9 V AC from the external transformer into +5 V (A, for logic), +5 V (B, filtered for video), +12 V and −5 V (for the dynamic RAM) |
| Program cartridge | Two 4K ROMs on a small board | Mapped at $8000–$BFFF; the left slot at $A000–$BFFF, the right slot (800) at $8000–$9FFF |
Address decoding
The motherboard's memory map decoder (Z103) is a one-of-ten decoder. Its inputs are A15–A13 (pin 12 grounded), giving eight select lines, S0–S7, one for each 8K block of the address space:
| A15 A14 A13 | Block | Selects |
|---|---|---|
| L L L, L L H, L H L, L H H | $0000–$7FFF | 8K RAM blocks (S0–S3) |
| H L L | $8000–$9FFF | 8K RAM or right/left cartridge (S4) |
| H L H | $A000–$BFFF | 8K RAM or left cartridge (S5) |
| H H L | $C000–$DFFF | 2K ROM and the I/O decoder (S6) |
| H H H | $E000–$FFFF | 4K OS ROMs (S7) |
Inserting a cartridge disables the RAM in the 8K blocks it covers. Inside the I/O page, a second one-of-eight decoder (Z105, enabled by S6, A11 and A12, fed by A8–A10) picks the custom chips: CTIA/GTIA at Y0, POKEY at Y2, the PIA at Y3 and an external select line at Y5. The other outputs are unused.
Power-up and reset, as Atari explained them
At power-up the OS finds the top of RAM, clears all memory, sets up the interrupt vectors, initialises any cartridge, opens the 24×40 text screen, boots a cassette if asked, checks the cartridge for disk-boot instructions, boots the disk if one is attached, and finally hands control to the cartridge or the booted program. A press of SYSTEM RESET does a shorter version. It clears only the OS's part of RAM, rebuilds the vectors and the handler address table, re-initialises the cartridge and screen, and returns control.
Service notes
- Interlock switches. Opening the 400's or 800's cartridge lid breaks the 9 V AC through an interlock switch, so the machine switches off when you change cartridges.
- Shared parts. The 400 and 800 use the same CPU board and 16K RAM board. Atari's 1983 service parts list prices them as one part (CA017173 and CA014802). See the service price list.
- Video adjustment. The potentiometer on the 800's CPU card sets the GTIA colour signal, and there's a hole in the metal shield so it can be adjusted with a screwdriver with the case closed.
- Further reading. For the RAM and personality modules as products, see Atari 400/800 memory modules. For the chips, see ANTIC, CTIA/GTIA, POKEY and SALLY. For the machines, see Atari 400 and Atari 800.
Credits
- Picture: An Atari 800 taken apart: card cage, CPU board, OS (personality) board, three 16K RAM boards, motherboard and power/I/O board. — Dale Mahalko, via Wikimedia Commons (CC BY-SA 3.0)
- Wikimedia Commons — Atari 800 - Internal components - laid out flat (Dale Mahalko), file description — Dale Mahalko, via Wikimedia Commons (CC BY-SA 3.0)
