Atari 400/800 Memory and Personality Modules (CX852, CX853, CX801, 400 48K Kit)
- Year
- 1979
- Type
- Upgrade
- Category
- Plug-in RAM and OS ROM modules for the 400/800
- Manufacturer
- Atari, Inc.
Overview
The Atari 800 was designed in 1978 as an expandable machine, and it shows under the lid. Beneath the hinged top cover, behind the cartridge slots, is a compartment with four card-edge sockets. One holds the Personality Module, which contains the operating system ROMs; the other three — front, middle and rear — hold Memory Modules, plug-in RAM boards in protective housings. Upgrading meant opening the lid and dropping in another module. No later Atari works this way: from the 1200XL on, RAM and OS are soldered to the main board.
The low-cost 400 uses the same RAM board design, but it has a single internal memory slot under the case rather than a user-accessible compartment.
The modules
| Module | Contents | Notes |
|---|---|---|
| CX801 10K ROM Personality Module (1979) | 400/800 OS (two 4 KiB ROMs) plus the 2 KiB Floating Point Package ROM (C012399) | NTSC; early units have OS Rev. A, most have Rev. B |
| CX801-P (1981) | Same, with the PAL OS Rev. A ROMs | Shipped in PAL 800s |
| CX852 8K RAM Module | 8 KiB of RAM | Fits any 800 RAM slot or, removed from its case, the 400 |
| CX853 16K RAM Module | 16 KiB of RAM | Listed at $99.95 in 1981 |
The 800 supports totals of 8, 16, 24, 32, 40 or 48 KiB. Modules are filled front to back, 16K boards before 8K boards, because each slot passes chip-select lines to the next: the front slot always serves the lowest memory, and the middle and rear slots pick up the higher 8 KiB blocks in turn. The rear slot also receives the /EXSEL, $D5xx and $D6xx select lines, which is why some third-party boards — including the Bit 3 Full-View 80 and the Austin 80 video board — plug in there. The RAM slots carry +5 V, −5 V and +12 V for the dynamic RAM chips of the day.
History
At the December 1978 press launch, the 800 was described with an 8 KiB OS ROM module and a 4 KiB RAM module; by the time it shipped in 1979 the standard fit was the 10K CX801 and one 8K CX852. From mid-1980 the 800 shipped with a 16K CX853 instead, and Atari repeatedly used modules as dealer incentives — a free CX852 with an 800 in late 1980, a free CX853 from May to August 1981. Some autumn 1982 machines shipped with two extra CX853s for 48K, and by 1983 every 800 had three CX853s with the compartment screwed shut.
The 400 was released with 8 KiB, most were sold with 16 KiB, and Atari only ever offered those two sizes from the factory, although its board slot was designed to accept a 32 KiB board. A 48 KiB 400 needs more than a bigger board: the computer must be modified to provide the S4/S5 chip-select and RD4/RD5 RAM-deselect lines that the 800 has but the 400 lacks. Third parties sold dozens of 32K and 48K boards from 1980 on. Atari's own 48K RAM Expansion Kit arrived only in June 1983, for both 8K and 16K 400s, installed through Atari service centres or sold as a kit through the Atari Program Exchange (APX).
Third-party alternatives
The module design invited competition. JACC's 16K board (1980) was the first non-Atari memory board, followed by Mosaic, Microtek, Intec, Tiny Tek, Axlon and many others with 16K, 32K and 48K boards (the larger ones often occupying several slots or needing a "loopback" card). Replacement personality boards appeared too: Newell's Ramrod (1982) added a second OS socket and 4 KiB at $C000; Prairie Physics' MEM/EX (1983) also added RAM at $C000; and in the modern era Incognito (2012), the Grecian Personality Board (2022) and the RAMROM card (2022) bring multiple OSes, extra RAM and storage to the 800.
Using it today / Known issues & tips
- Check the slot order if an 800 reports less RAM than expected: a 16K board behind an 8K board, or a gap, breaks the chain.
PRINT FRE(0)in BASIC is a quick check. - Personality module = OS version. Swapping the CX801 is how you change the 800's OS, and how boards like Incognito install themselves.
- 400 upgrades need the internal modification described above for a full 48K; some period boards, such as Axlon's 48K board, offered a no-modification option giving 40K, or 48K with a helper board in the cartridge slot.
- Emulation. In Altirra choose "800" hardware and pick 8–48K of memory; the 400/800 OS Rev. A or B ROM corresponds to the CX801.
Credits
- Picture: A 16K RAM board of the kind fitted in Atari 800 memory modules, shown without its housing. — Evan-Amos, via Wikimedia Commons (Public domain)
- comp.sys.atari.8bit FAQ (Michael Current) — 1.2 (400), 1.3 (800 versions/packages), 1.15 (personality and RAM slot pinouts), 6.12 (memory upgrades), 6.13 (personality boards), 11.1 timeline (1978 launch, 1980-1983 packaging and promotions, APX 48K kit) — Michael Current (comp.sys.atari.8bit FAQ), 1978
