Super Products (Australia): SuperMax, Super800, SuperRAM and SuperMon
- Year
- 1985
- Type
- Vendor
- Category
- 1980s Australian maker of drive, memory, OS and printer add-ons
- Manufacturer
- Super Products (Australia)
- Tags
- vendor, australia, super-products, supermax, superdos, super800, superram, supermon, superface, 1050, memory-upgrade, os-rom
- Related
- SuperDOS, ICD US Doubler
Overview
Super Products was an Australian company whose add-ons covered almost every part of an Atari system: the disk drive, the memory, the operating system and the printer. Its products tied in with SuperDOS, written by Paul Nicholls, which Super Products published in Australia and which also appeared through Happy Computers and Antic's Arcade Catalog in the U.S. The product details below come from the comp.sys.atari.8bit FAQ's catalogues of drive upgrades, memory boards and modified operating systems.
The range
| Product | Year | What it is |
|---|---|---|
| SuperMax 1050 | 1987 | A drive upgrade for the Atari 1050: a US Doubler-style board giving true double density and about four times faster reads and writes with SuperDOS or another high-speed DOS. It has a switchable ROM (standard or SuperMax). Early units used a format command that only SuperDOS understood. Accounts differ on whether it was purely plug-in or needed one soldered wire |
| Super800 | — | A piggyback board for the 800's CX801 personality module. It lets the 800 run either the 400/800 OS or the XL OS, with hardware switches for "XL emulation" and SuperMon. It includes 16K RAM and works with SuperRAM |
| SuperRAM (800) | — | A 256K piggyback board for a 16K RAM board in the 800's middle slot: 16 banks of 16K, one visible at a time, for a total system potential of 304K with all three slots filled |
| SuperRAM (600XL/800XL, 130XE) | — | XL/XE versions. The XL board is listed with RAMBO-style PORTB banking and "no soldering required"; there's also a 130XE version |
| SuperMon | 1985 | An OS chip by Will Visser: a 400/800 OS "translator" for XL/XE machines with extras, including a disassembler, DOS functions and a four-colour screen dump. Also supplied with the Super800 |
| PrintMon | c.1985 | SuperMon with printer output redirected to a joystick port (port 2 on XL/XE, port 4 on the 800) |
| SuperFace | — | The Centronics printer interface for PrintMon: a 36-pin printer plug on a joystick-port cable |
SuperDOS
The software side was SuperDOS: menu-driven, fully RAM-resident and "density-smart". It handled the 810, 1050, Percom-style double-density drives, the SuperMax high-speed mode (from version 4), and the XF551 and US Doubler UltraSpeed (from version 5, 1988). Version 5 added a 360K double-sided format and RAM-drive support for Axlon or PORTB banked memory, including the Newell 256K upgrade. See >SuperDOS for details.
Today
The SuperMax is among the drive upgrades that later multi-mode boards can emulate. For example, one modern 1050 controller board is described as able to "emulate Happy, US Doubler, Super Archiver, and SuperMax". For similar products from other makers see ICD US Doubler, CSS Ultra Speed OS, Newell's Ramrod and Atari 400/800 memory modules.
Credits
- comp.sys.atari.8bit FAQ (Michael Current): 3.2.2 1050 upgrades (SuperMax), 4.6 printer interfaces (SuperFace), 6.12 memory (SuperRAM), 7.1.2 OS versions (Super800, SuperMon, PrintMon), 7.3.3 DOS (SuperDOS) — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge forum — Detecting Various Types of Drives via SIO (SuperMax 1050, Super Products (Australia), 1987) — AtariAge forum members, 1987
