Newell Ramrod and CDY Omnimon

Year
1982
Type
Upgrade
Category
OS replacement board and resident machine-language monitor ROM
Manufacturer
Newell Industries (Ramrod); CDY Consulting (Omnimon)

Overview

The Atari 800 keeps its operating system on a plug-in personality board. Newell Industries' Ramrod (1982) replaced that board with one carrying five ROM sockets: room for two operating systems switched by a toggle, the floating-point ROM, and, most importantly, a chip in the unused 4 KB block at $C000-$CFFF. That slot usually held Omnimon!, David Young's resident machine-language monitor from CDY Consulting of Richardson, Texas. Press SYSTEM RESET together with OPTION or SELECT at any time, from any program, and Omnimon takes over. You can examine, change and disassemble memory, read and write disk sectors without DOS, and return to where you left off.

Specifications

Item Value
Ramrod board Replaces the 800's 10K OS personality board (800 only)
Sockets 2 for OS ROMs, 1 for the floating-point ROM, 2 for the $C000 block
OS selection Hardware toggle between two OS versions
Launch price (Antic, February 1983) $115.95; 4K or 12K options extra
Board design System Innovations for Newell
Omnimon (standalone) $89.95 in 1983, with a piggyback board for a stock OS board
Omnimon location $C000-$CFFF (4 KB); 8K version bank-switched with a toggle

Versions

Ramrod bundles. The earliest Ramrods came with Supermon! (Omnimon's predecessor) and 4 KB of RAM. Later ones shipped with Omnimon, and most with both Omnimon and OSN, Newell's replacement 400/800 OS by Wes Newell. OSN adds graphics modes 12-15 (missing from the original 400/800 OS), a programmable cassette baud rate, faster key repeat, and the option to ignore a cartridge at power-on. "Ramrod 2" had OSN only, and "Ramrod 3" neither. The Ramrod XL and XL2 carried the idea to the 800XL, 65XE and 130XE: a board in the OS ROM socket with three sockets and a switch. They were supplied with OmnimonXL, which combines OSNXL, Newell's Fastchip floating point and the monitor in one ROM.

Omnimon versions. The standard 4K version has a HELP command. Advanced Version A adds utilities plus support for the Happy 810 and the Bit 3 Full-View 80. Version R adds an Axlon RAM disk. Versions L and U split disk I/O and debugging features. The 1984 8K Omnimon combines L and U with a toggle switch, and inverts the screen characters to remind you to flip it.

History and reception

Antic announced the Ramrod in February 1983 as a way to "free up more of the 800's potential 64K", while keeping the Atari OS available at the flick of a switch. Reviewing Omnimon in July 1983, David Duberman called it "a machine-language monitor that should have come with the ATARI". His example: you forgot to boot DOS but need to save a BASIC program. Enter Omnimon, note the BASIC pointers at locations 128-145, write the program memory to a blank disk, boot DOS, restore the pointers and reload, all without losing your work. An advanced version also offered Happy-drive upload and download and a warm-start after a lock-up.

Known issues

These boards conflict with some other hardware. Antic's 1986 SupraDrive review warned that "custom chips such as RAMrod and Omnimon will severely damage the SupraDrive". Fit them only on systems without that hard disk.

Using one today

  • Omnimon is ideal for low-level debugging on real 800 hardware. Keep its manual handy, because the commands are terse.
  • The $C000 block that Omnimon uses is also where Mosaic and some RAM upgrades put extra memory, so don't combine them carelessly.
  • The modern Atari 800 RAMROM personality card can hold Omnimon and Omniview firmware in its flash ROM alongside up to four operating systems.

Credits