SIO2USB (ABBUC RAF)
- Year
- 2007
- Type
- DIY project
- Category
- USB flash drive disk emulator
- Manufacturer
- ABBUC Regional Group Frankfurt/Main (RAF)
- Tags
- sio, usb, flash-drive, disk-emulation, atr, xfd, abbuc, germany, rtc, club-project
Overview
SIO2USB was developed between 2003 and 2007 by the Frankfurt/Main regional group of ABBUC (Regionalgruppe Frankfurt, RAF), the German Atari user club. Long before SD-card drives became common, it let an Atari 8-bit use an ordinary USB flash drive as its disk drive. It plugs into the SIO bus like any drive, so the computer needs no modification, special OS or drivers. Disk images are stored as ATR or XFD files on a FAT-formatted stick, so you prepare them on a PC and carry them over.
Don't confuse it with the generic "SIO2USB" cables, which are USB-to-serial SIO2PC adapters that let a PC run drive-emulator software. Atari owners often use the name loosely for those. ABBUC's device is self-contained and needs no PC at all. See USB SIO2PC cable for the other kind.
Features
| Feature | Detail |
|---|---|
| Drives | up to 3 virtual drives at once, alongside real drives on the same chain |
| Media | standard USB mass-storage flash drives, FAT filesystem |
| Image formats | ATR and XFD |
| Controls | built-in keys and an LC display, or a configuration program running on the Atari |
| Clock | built-in real-time clock |
| Power | taken from the SIO bus, for the device and the USB stick. No external adapter |
| Firmware | updatable from the Atari itself, from a file on the USB stick or from a real disk drive |
| Compatibility | works with all Atari DOS and OS versions and with Atari-compatible extensions, and can boot a machine that has no floppy drive |
Besides the disk IDs it emulates ($31–$3F), SIO2USB has its own SIO device ID, $70, in the published table of SIO device IDs. SDrive ($71–$74) and SIO2SD ($72) have their own IDs too, which is worth knowing if you mix these devices or write software that probes the bus.
Using one
- Copy ATR or XFD images onto a FAT-formatted USB stick, plug it in, and choose an image for each virtual drive with the keys and LCD or the Atari utility. Then boot as you would from a 1050.
- You can mix it with real drives, so it is handy for copying physical disks to images and back.
- Because it draws power from SIO pin 10, the same caveat applies as for other SIO-powered devices: the 1200XL doesn't supply +5 V on that pin.
Place in history
SIO2USB was one of a wave of 2000s European club projects that moved Atari storage to modern media, alongside SIO2IDE, SIO2SD and SDrive. SD-card and network devices such as FujiNet have since overtaken it, but units built in the club era are still in use. For the club and its other projects, see ABBUC.
Credits
- comp.sys.atari.8bit FAQ, section 3.2.8 (SIO2USB feature list) and 1.15 (SIO pin 10 on the 1200XL) — Michael Current (comp.sys.atari.8bit FAQ)
- AtariMania copy of the FAQ — How can I use a USB flash drive with my Atari? (SIO2USB, 2007) — AtariMania, 2007
- Altirra Hardware Reference Manual — Table 29, SIO device IDs — Avery Lee (Altirra)
- AtariAge forum posts using 'SIO2USB' for USB SIO2PC cables (e.g. topics 297536, 343508) — AtariAge forum members
