SIO2SD
- Year
- 2007
- Type
- DIY project
- Category
- SD-card floppy drive emulator (SIO)
- Manufacturer
- Open-source project (Jakub Kruszona-Zawadzki et al.); boards built by many makers including Lotharek and Mega-Hz
- Tags
- sio, sd-card, avr, atr, xex, lcd, open-source, poland, disk-emulation, diy
Overview
SIO2SD made "no disk drive needed" practical for ordinary Atari owners. It plugs into the SIO port and emulates disk drives from images on an SD or MMC card. A two-line LCD and a few buttons let you browse the card's folders and mount images without a PC. Because it sits on SIO, it needs no internal modification and works with any OS or DOS.
It was an open-source project dating from 2007. Its team was Jakub Kruszona-Zawadzki as inventor and AVR firmware developer, Paweł Nowak (Pajero/MadTeam) for the Atari software and testing, Marcin Sochacki (Montezuma) for the NVC PC tool, and Jakub Husak as tester and designer of the later SMD board. The project home was sio2sd.gucio.pl. Since the design was open, many makers produced boards and cases. Lotharek sold several variants (SIO2SD 2k12, starter sets, grey/black/white cases), and Mega-Hz sold an SIO2SD rev.2. It remains one of the standard answers to "how do I load games without a disk drive?"
Features (firmware 3.0)
| Feature | Detail |
|---|---|
| Cards | MMC, SDSC, SDHC (SDXC probably, if FAT32-formatted) |
| Partitioning / filesystems | none, MBR or GPT; FAT12, FAT16, FAT32 |
| File types | ATR (read/write), XFD (read-only), COM/XEX executables (read-only) |
| Densities | all 128- and 256-byte-sector formats, disks up to 16 MiB |
| Drives | D1:–D15:, plus 100 "virtual drives" V0–V99 that can be mapped onto any D1:–D15: |
| Display | 16×2 LCD (40×2 also supported) |
| Speed | proprietary turbo, switched by bit 7 of the command byte, similar to XF551 high speed; built-in turbo loader |
| Card management from the Atari | create, rename and delete ATR files and folders by SIO command; "empty disk" mode creates an ATR when you format |
Fast mapping: hold one of keys K1–K4 at power-on to put virtual drive V0–V3 into D1:. That gives you one-button boot choices.
Using it
- Format a card FAT16 or FAT32 and put an Atari folder of ATR and XEX files on it, together with the configuration program, which must be on the card.
- Plug SIO2SD into the SIO chain. It can share the chain with real drives, provided they use different unit numbers.
- Walk the folder tree on the LCD, assign images to drives, then boot. Executables load through the device's own loader.
- On the PC, NVC organises files on the card and DriveSort sorts files and directories on the card.
- SpartaDOS X users can drive it from the command line with DLT's S2S add-on.
Known limitations
- 512-byte-sector ATRs won't work. SpartaDOS FS 2.1 images with 512-byte sectors mount but can't be read or formatted, because the firmware doesn't handle sectors that large.
- No XF551 high-speed emulation. The XF551 changes speed between command and data frames, and the SIO2SD author has described turbo-system emulation as trial and error with little documentation to go on. DOS XE in XF551 mode is therefore a poor match.
- The proprietary turbo needs software that knows about the bit-7 command flag. Standard 19.2 kbit/s always works.
Related projects
- SIO2BT offers an SIO2SD+BT combo board that adds Bluetooth.
- A separate, same-named open-source Arduino project by c0pperdragon (github.com/c0pperdragon/SIO2SD) emulates a 1050 drive. Don't confuse its firmware with the AVR original.
- For a simpler, LCD-less SD design, see SDrive and its Arduino descendant SDrive-MAX.
Credits
- Picture: A Lotharek-built SIO2SD, with the 16×2 LCD and five buttons used to browse the SD card. — Lotharek's 'SIO2SD Biggus Dickus' SIO2SD build in a clear case, product photo from Lotharek's Lair (lotharek.pl) (Used for identification/commentary)
- comp.sys.atari.8bit FAQ, sections 3.2.8 and 3.3.5 (Michael Current, Feb 2026) — Michael Current (comp.sys.atari.8bit FAQ), 2026
- AtariMania FAQ — How can I use a Secure Digital (SD) card… — AtariMania
- AtariAge — SIO2SD + SDFS 2.1 — AtariAge forum members
- AtariAge — RespeQt r2 released (XF551 / turbo discussion mentioning SIO2SD) — AtariAge forum members
- AtariAge — SIO2USB? (SIO2SD recommended as a stand-alone option) — AtariAge forum members
- ATARI_LINKS.md — Hardware projects and modern expansions
