Bit 3 Full-View 80

Year
1982
Type
Upgrade
Category
80-column video card (Atari 800)
Manufacturer
Bit 3 Computer Corporation
Cover of the Bit 3 Full-View 80 manual for the Atari 800

Overview

The Atari's 40-column screen was a handicap for word processing, terminal work and CP/M. The Full-View 80, launched by Bit 3 Computer Corporation in 1982, was an early and widely supported answer. It's a card that replaces the RAM board in slot 3 of an Atari 800 and drives its own 80 × 24 text display through a composite video output. When the card is idle, the normal Atari picture passes straight through. Because the card takes a RAM slot, a 48K system needs a 32K board in one of the other slots.

Specifications

Item Value
Fits Atari 800, RAM slot 3 (rear)
Text 80 × 24 characters, 8 × 10 cell matrix with true lowercase descenders
Resolution 640 × 240 (text only, no graphics)
Output Composite video; a monitor with at least 10 MHz bandwidth is recommended
Display controller Synertek SY6545-1 CRTC at $D580-$D581
Video RAM 2 KB static RAM, accessed only through the CRTC during blanking
Character set 4 KB EPROM, 256 characters (inverse generated externally)
Firmware 4 KB EPROM, 16 banks of 256 bytes at $D600-$D6FF
Control register $D508 (firmware bank, video switch, blanking)

Software support

At launch the card supported Atari BASIC, BASIC A+, OS/A+, EASMD, most of Microsoft BASIC, Atari Pascal, the Atari Assembler Editor and most of the Atari Macro Assembler. There were 80-column versions of LJK Letter Perfect, Data Perfect and the Edit 6502 assembler. Support spread from there: - OSS produced a Bit-3 version of DOS XL, so BASIC XL, ACTION! and MAC/65 could be used in 80 columns. - Omnimon Advanced and RAM-disk versions included Full-View 80 support. - The ATR8000's CP/M terminal program could use it through the AUTOBIT3 utility, giving a true 80-column CP/M console. - Later, CDY's Omniview packages included instructions for patching the Bit-3 versions of Letter Perfect and Data Perfect.

How it works

The card's 6545 CRTC generates 80-column timing at a 14.31 MHz dot clock (twice the NTSC colour subcarrier). Its firmware's default setup gives a horizontal rate of about 15.84 kHz, so a standard composite monitor can show it. The CPU never touches video RAM directly. Using a feature unique to Synertek's 6545-1, the card automatically schedules reads and writes during blanking intervals through an update-address register, which auto-increments. Firmware lives in a banked 256-byte window at $D600, an area the cartridge port can't map, which is one reason Bit 3 chose a RAM slot.

History

Competition arrived in 1983 with Austin Franklin Associates' Austin 80, which added RGB colour. Antic's reviewer noted that 80-column software written for the Bit 3 didn't work on the Austin card. The Bit 3's software base kept it relevant: in Antic's July 1987 review of the Magna RAMcharger, the reviewer mentioned running the RAMcharger beside "the BIT-3 80-column card" in a fully loaded 800.

Using one today

  • You need an Atari 800, a 32K board for one of the remaining slots, and a sharp monochrome or composite monitor.
  • Altirra emulates the Full-View 80, which is handy for testing 80-column software or the card's firmware.
  • XL/XE owners have no slot for it. The equivalents there are Atari's XEP80, software solutions like Omniview, and modern boards such as VBXE.

Credits