SynComm
- Year
- 1983
- Publisher
- Synapse Software
- Type
- Application
- Category
- Terminal / telecommunications
- Developer
- Pete Goodeve
- Requirements
- 48K Atari 400/800/XL/XE, disk drive, 850 interface (port 1) or compatible RS-232 interface, acoustic or direct-connect modem; printer optional; disable BASIC on XL machines
Overview
SynComm is the telecommunications program from Synapse Software's business series, written by Pete Goodeve and copyrighted 1983. It cost $39.95 when Antic reviewed the series in February 1985. Like its siblings it uses pop-up command menus rather than memorised codes, and Antic noted that its commands "do not require memorizing the elaborate mnemonic schemes used by some modem software".
It works with 300 and 1200 baud modems connected through an 850 interface (port 1) or a compatible RS-232 interface, and is meant for calling bulletin boards and online information services.
Features
- Smooth scrolling. The feature Antic singled out: incoming text fine-scrolls up the screen so smoothly that "your eyes easily read without interruption". Words that would overflow a line move down to the next one.
- Text blocks. SynComm keeps up to 20 independent text blocks in memory, each of any size up to available memory. You can capture incoming text into a block (Memorize Data), delimit blocks while online, write blocks to disk or printer, read files from disk into blocks, create them with a built-in screen editor, and transmit them, even in segments. Logging the whole session into separate blocks means you never have to worry about a single buffer overflowing.
- XMODEM. The manual calls it the Christensen protocol, after its author, and notes that it was becoming the unofficial standard for Atari-to-Atari file transfers. It provides error-free file transfer when the other end supports it.
- Atari-to-Atari link. Two SynComm users can connect directly, without a BBS in between.
- Configuration files. Settings such as duplex, parity, line feeds, 850 parameters, baud rate and character translation (ATASCII to ASCII and so on) are stored in configuration files. A utility on the back of the disk creates new ones, and ready-made files cover common situations. Some settings, such as translation and baud rate, can only be changed this way.
- Log-on sequences. Repeated strings, such as a service's sign-on routine or modem dialling commands, can be stored on disk and stepped through with a few keystrokes.
- A session clock that resets when you hold START.
Using the program
Commands sit behind the console keys. Hold OPTION to see the command screen and pick an item. SELECT reviews the previous command, and OPTION combined with a number reaches disk operations. Boot with all cartridges removed. On an 800XL, hold OPTION while powering on to disable BASIC.
Using it today
SynComm talks to the modem through the 850's R: handler, so it works with any setup that emulates an 850 and a Hayes-style modem, including Telnet "modems" for internet BBSs. It reflects 1983-era assumptions, such as 300/1200 baud. Later programs such as BobTerm or Ice-T are more practical for modern boards.
Credits
- Picture: The SynComm user's guide cover (Synapse, 1983). — Manual cover scan, from the 'Atari documents' manuals collection (SynComm_manual.pdf)
- Antic Vol. 3 No. 10 (February 1985) — Syntegrated Software, Michael Ciraolo — AtariMagazines.com (Kevin Savetz), 1985
