The Super Archiver
- Year
- 1987
- Publisher
- Computer Software Services (CSS); software marketed by B & C ComputerVisions
- Type
- Utility
- Category
- Track-level disk copier and editor for the Super Archiver 1050 upgrade
- Developer
- Michael Gustafson & Robert Puff (Computer Software Services)
- Language
- 6502 machine language (computer and drive code)
- Requirements
- Atari 800/XL/XE; an Atari 1050 fitted with the Super Archiver upgrade (or an 810/1050 with the original Archiver chip for the reduced feature set); extra RAM (Axlon, 130XE-type) used if present
- Tags
- disk-utility, copy-protection, archiver, 1050, css, bob-puff, fuzzy-sectors, skew, atx, preservation, respeqt, altirra
Overview
The Super Archiver is both a 1050 drive upgrade and the software that drives it. Computer Software Services (CSS), the company of Bob Puff, built it in 1987 as a successor to the Archiver chip for the 810 and 1050. The Archiver had been created by Spartan Software of Minnesota in 1983, and its rights later passed to ICD. The software's title screen credits Michael Gustafson and Robert Puff, with copyright held by B & C ComputerVisions, which marketed it.
Ordinary copiers work with sectors. The Super Archiver works with tracks. It can read and reproduce how sectors are actually laid out on a track: their order and timing, missing and duplicate sector numbers, CRC errors, deleted-data marks, and the deliberately unstable "phantom" sectors used as copy protection. CSS's 1993 catalogue claimed that copies "are exact duplicates of originals", with no patches, PDB files or extra hardware needed, and called it the most powerful copying and disk-editing tool for the 8-bit. The same catalogue warns that it was meant only for backing up disks you own.
The software
The boot disk offers five programs:
- Super Archiver/Editor 3.0x. The main program copies whole disks and lets you inspect and change everything on a track. A status line shows each sector's type with a symbol: CRC error, deleted data mark, short sector (
s), double-density "long" sector (D), phantom sector (p), and combinations of these. You can edit sector data with a built-in disassembler, then use the Formatter and Mapper pages to design custom track layouts. On a Super Archiver 1050 these can hold up to 40 sectors per track, and the mapper can read up to 42. - Super Archiver (Skew) 3.1x. A copier that reproduces the exact alignment of tracks relative to each other. CSS said it needed this for some Electronic Arts titles.
- Fuzzy Sector Maker, for writing phantom sectors of your own.
- The Archiver Tracer, which follows a program as it loads so you can see which sectors it reads and checks.
- Super Archiver Diagnostic, including the drive speed test used when installing the hardware to calibrate normal speed and the 270 rpm slow speed.
The release notes compare three setups: the old Archiver 1.x software, the new software on old Archiver hardware, and the new software on a Super Archiver 1050. With the full combination you get these improvements:
- Long tracks (more than 19 full sectors). The software slows the drive automatically instead of asking you to adjust it by hand.
- Short sectors (1–127 bytes, usually with a CRC error) and double sectors sharing a sector number. These are used to cram 26 or more sectors onto a track, and can now be mixed with CRC-error sectors.
- Phantom ("fuzzy") sectors. The software detects them, marks which bytes are unstable and reproduces them, keeping the stable part of the data exact. The 1993 catalogue says no other modification could reproduce phantom sectors.
- Extra memory. Axlon, 130XE and compatible RAM lets most disks be copied in one pass.
- UltraSpeed I/O at about 50K baud, with SELECT+OPTION to fall back to standard speed. Holding OPTION while pressing RESET keeps the data in memory.
Hardware and add-ons
The 1050 upgrade is a plug-in module with four wires and a speed potentiometer. It gives true double density, US Doubler-compatible UltraSpeed, and full compatibility with the older Archiver software. CSS sold it for $69.95 and offered to install it free. Super Archiver II (1988) added enhanced density and an enhanced-density editor. The Bit-Writer add-on writes raw bits instead of sectors. It was CSS's answer to the few protections the Super Archiver could not copy, such as the 34-sector tracks of later Electronic Arts and Synapse titles. In 2016 a combined Super Archiver/BitWriter replica board appeared.
Using it today
The Super Archiver is still in use for disk preservation, because it can read protected originals well enough to make ATX images and write them back. RespeQt 4.1 (2018) added emulation of the Chip 810 and Super Archiver 1050 at the SIO level, including skew alignment and weak sectors. That lets you copy a real protected floppy straight to an ATX file, or recreate a protected floppy from an ATX. One tester wrote a working Alternate Reality: The Dungeon, which has a phantom sector, using a BitWriter replica drive. Altirra emulates the Super Archiver drive at the hardware level, including its slow-speed mode and the BitWriter add-on, given the drive firmware. That is a safe way to learn the editor before you risk a real disk.
The usual cautions apply. Copy only originals you own, and remember that one title can exist in several releases with different protections.
Credits
- Picture: The Super Archiver software menu (1987): editor, skew copier, fuzzy sector maker, tracer and diagnostics. — Screenshot from Gury's Atari 8-bit Forever portal (super_archiver.png)
- Notes on The Super Archiver / 1050 Super Archiver installation guide (Computerhouse UK) — Internet Archive item atari_SuperArchiver — Internet Archive
- Computer Software Services 1993 Product Catalog — Internet Archive — Internet Archive, 1993
- Gury's Atari 8-bit Forever — The Super Archiver (title screen, credits) — Screenshot from Gury's Atari 8-bit Forever portal (super_archiver.png)
- comp.sys.atari.8bit FAQ — 3.2.1/3.2.2 drive enhancements (The CHIP, 1050 Archiver, Super Archiver, Super Archiver II, Bit-Writer) — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge forum — RespeQt 4.1 beta (Chip 810 / Super Archiver 1050 emulation, ATX) — AtariAge forum members
- AtariAge forum — RespeQt general discussion — AtariAge forum members
- AtariAge forum — Happy & Super Archiver backup matrix — AtariAge forum members
- AtariAge forum — Detecting Various Types of Drives via SIO (BitWriter replica, tf_hh 2016) — AtariAge forum members, 2016
- Altirra change logs (Super Archiver full drive emulation; slow speed; BitWriter add-on) — Screenshot from Avery Lee's Altirra page, virtualdub.org
- Altirra extended change log — Avery Lee (Altirra)
