Happy Warp Speed Software
- Year
- 1983
- Publisher
- Happy Computers, Inc.
- Type
- Utility
- Category
- Disk drive enhancement software (backup, copy, fast DOS)
- Developer
- Happy Computers, Inc.
- Requirements
- Atari 810 or 1050 drive fitted with the matching Happy Enhancement (Rev 7 software needs Rev 7 hardware on the 810)
- Tags
- happy, disk-drive, backup, copier, warp-speed, 810, 1050, dos, copy-protection, preservation
- Related
- Altirra, Atari DOS 2.0S, DOS XL, RespeQt, TOP-DOS, Happy 810 Enhancement
Overview
The Happy Enhancement boards from Happy Computers (first of San Jose, later Morgan Hill, California) were the best-known speed-up and backup upgrades for Atari's 810 and 1050 drives. The hardware gave the drive its own track buffer and a fast serial mode. The Warp Speed Software disk that came with each board is what made it pay off. It held a fast DOS, a buffered sector copier, the famous Happy Backup programs and a set of diagnostics. This entry covers that software. The boards themselves are hardware.
What the hardware does, and why the software matters
Antic reviewed the Happy 810 Enhancement in July 1983 at $249.95. On a stock 810, every sector is located, read and sent one at a time while the disk keeps spinning. With Happy installed, a request for any sector reads the whole 18-sector track into the drive's buffer in about one revolution, so the following sectors arrive with no extra search time. The board reads up to three times faster with any software, and the Happy 1050 claimed up to five times. The reviewer noted that Happy could not speed up writing by itself. That needed special software, and the Warp Speed disk supplied it: buffered fast writes with verify, and the high-speed "Warp Speed" serial transfer mode.
Contents and revisions
Each generation shipped with:
| Revision | Era | Programs |
|---|---|---|
| Happy Backup (single drive) | 1982–83 810 units | backup only; later Multiple Drive Backup, Compactor and Customizer |
| 5.x (810) | 1983–86 | Warp Speed 5 DOS (requires Atari DOS 2.0S), Slow It Down, Diagnostic, Sector Copier, Happy Backup, Happy Compactor, Multi Drive Happy Backup, Tracer |
| 6.x (1050) | 1985–86 | Drive Options, Diagnostic, Sector Copier, Happy Backup, Happy Compactor, Tracer |
| 7.0 (1050) | 1986 | adds 1050 Warp Speed DOS V2.0 |
| 7 (810 + 1050) | 1986–87 | Warp Speed 7 DOS (a modified Atari DOS 2.0S), Drive Options, Diagnostic, Sector Copier, Happy Backup, Happy Compactor, Multi Drive Happy Backup, Tracer |
| 7.1 | 1987– | as 7, plus HZPFIXR7.BAS (Customizer patch for Rev 7 810s) and, for the 1050, the IBMXFR PC file transfer utility |
The main tools:
- Happy Backup / Multi Drive Happy Backup back up disks with one drive or several. The enhanced firmware can read and recreate non-standard disk formats, which is what made Happy famous.
- Happy Customizer (HZP) creates non-standard disks track by track.
- Sector Copier makes buffered whole-disk copies of ordinary disks.
- Warp Speed DOS is a Happy-aware Atari DOS 2.0S derivative that uses the fast transfer mode.
- Drive Options, Diagnostic, Slow It Down, Tracer and Compactor round out the disk. Their scanned manuals on archive.org describe them in detail.
Antic's February 1988 New Products column announced version 7.10, priced at $99.95 with hardware or $10 for software only. Its headline feature was IBMXFR, which reads and writes PC 5.25" disks (single-sided double density, 40 tracks × 9 × 512 bytes, 180K) in a Happy 1050. Text files, databases and program source could move between an Atari and a PC without the PC present.
Happy also sold software that needed Version 7 hardware: Warp Speed DOS XL (a modified OSS DOS XL in under-cartridge, under-ROM and Axlon-memory versions) and Eclipse Software's TOP-DOS 1.5. An 810 Version 7 upgrade kit (1986) brought older boards up to date with a new ROM (2732 or 2532 type) and Rev 7 software, and supported adding a slow/fast switch.
Collectors' notes
Two releases stand out to collectors. 5.3 was the last of the 5.x line for the original 810 board and supported the "Autospeed" mod. That mod lets an 810 slow its motor so it can write tracks with more than 22 sectors, which a Happy 1050 could always do. 6.6 was the last 6.x release before Happy began using PDB files. Some users consider it the best straight 1:1 copier Happy ever shipped. Several circulating dumps of these disks are missing side B, and no image of the original 7.0 disk is known, so check an image before relying on it.
Clones of the Happy 1050 board, such as CSS's Klone and Klone II, shipped with copies of Warp Speed Software (pre-7.0 and 7.0 respectively).
Using it today
- Emulation. Altirra emulates Happy 810 and Happy 1050 drives, including buffered track reads, the Happy 1050 memory map and the 810 Autospeed mod. You can run the Warp Speed tools against an emulated drive.
- With RespeQt. RespeQt emulates a Happy 810 Rev 5 and a Happy 1050 Rev 7. This is intended only for Happy Backup, writing at standard 19,200 bit/s speed. Other tools, such as the Sector Copier, are not supported. Using a real Happy 1050 alongside RespeQt is fiddly: boot Happy 7.1 from RespeQt with the real drive set to D1: but switched off, then disable RespeQt's D1: and power the drive on.
- Preserving protected disks. For archival images, flux-level tools (KryoFlux, SuperCard Pro or Greaseweazle, converted to ATX with a8rawconv) are the better choice.
- Scans of the 810 Warp Speed, 1050 Rev 6 and 810/1050 Rev 7 manuals are on archive.org.
Credits
- Picture: Title page of the Warp Speed Software Rev 7 user manual (Happy Computers, 1986), covering both the 810 and 1050 Enhancements. — Title page of the 'Happy 810 & 1050 Enhancement Warp Speed Software Rev 7 User Manual' (Happy Computers, 1986), scan from the Internet Archive item 'Happy8101050EnhancementRev7' (Used for identification/commentary)
- comp.sys.atari.8bit FAQ (Michael Current): Happy 810 / Happy 1050 Enhancement entries — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 2 No. 4 (July 1983): Product Reviews — Happy 810 Enhancement — AtariMagazines.com (Kevin Savetz), 1983
- Antic Vol. 6 No. 10 (Feb 1988): New Products — Warp Speed Ver. 7.10 — AtariMagazines.com (Kevin Savetz), 1988
- AtariMania — Happy Warp Speed Software v5.3 — AtariMania
- AtariMania — Happy Warp Speed Software v6.6 — AtariMania
- AtariMania — Happy Warp Speed Software v7.0 — AtariMania
- AtariAge forum: RespeQt v5.3 and Happy mode — AtariAge forum members
- AtariAge forum: Proper method to image disks ATX-RespeQT-Happy 1050 — AtariAge forum members
- Altirra changelog (Happy 810/1050 emulation) — Screenshot from Avery Lee's Altirra page, virtualdub.org
- Internet Archive — Happy 810 & 1050 Enhancement Rev 7 manual (scan; title page only used) — Title page of the 'Happy 810 & 1050 Enhancement Warp Speed Software Rev 7 User Manual' (Happy Computers, 1986), scan from the Internet Archive item 'Happy8101050EnhancementRev7' (Used for identification/commentary)
