The Chip / Archiver and Super Archiver

Year
1983
Type
Upgrade
Category
Disk drive upgrade (copy and analysis), Atari 810 and 1050
Manufacturer
Spartan Software of Minnesota; ICD, Inc. (from 1984); Computer Software Services (Super Archiver)
Super Archiver upgrade module with wire leads

Overview

Copy protection on Atari disks relied on things a stock drive couldn't create: bad or missing sectors, duplicate ("phantom") sector numbers, odd timing between sectors. The Chip, released by Spartan Software of Minnesota in 1983 and popularly called the Archiver or Archiver Chip, was a replacement-firmware upgrade that gave the computer direct access to a drive's floppy controller. With its Archiver/Editor software (disassembler, sector editor, custom formatter and disk mapper), you could see exactly how a disk was laid out and write one the same way. ICD took over the rights in 1984 and made a 1050 version. Computer Software Services (CSS) later built the more capable Super Archiver and its Bit-Writer add-on. They're still useful today for examining original disks.

The family

Product Drive Year Notes
The Chip ("810 Archiver") 810 1983 Spartan Software, rights to ICD in 1984; re-released by B&C ComputerVisions as Scan-It!/Chip (1987)
Happy 810 Archiver Happy-equipped 810 Spartan/ICD; later Scan-It! H810
1050 Archiver ("1050 Chip") 1050 1985 ICD
Happy 1050 Archiver Happy-equipped 1050 1985 ICD
Super Archiver 1050 1987 CSS; adds double density, Archiver and US Doubler compatibility
Super Archiver II 1050 1988 Adds enhanced-density editing
Bit-Writer Super Archiver 1988 CSS; writes raw bit patterns
BitWriter 1050 Replica 1050 2016 Jürgen van Radecke: Super Archiver and Bit-Writer on one board

CSS also sold an Archiver Enhancement (1986) and a separate Super Archiver software package (marketed by B&C, 1987) for the original Archiver chips: Super Archiver/Editor 3.02, a skew-aware Super Archiver 3.12, Fuzzy Sector Maker, Archiver Tracer and diagnostics.

How the Super Archiver works

Inside the Super Archiver:

  • It keeps the 1050's 6507 but adds 2 KB of RAM and modified 4 KB firmware. The ROM is bank-switched into a 2 KB window, and writes to that window land in RAM, so code can patch itself.
  • Most functions are hidden behind an Open command that needs a four-digit hex unlock code built into the firmware. The common one is ABCD. This kept ordinary programs from detecting the upgrade.
  • It can slow the spindle from 288 RPM to about 270 RPM under software control, a trick for recreating timing-based protection.
  • The Bit-Writer adds 8 KB of RAM, a PIA and an automatic shift register. It streams pre-encoded FM data straight to the head at one bit cell every 4 µs, which can produce patterns the floppy controller itself can't write. It's single density only, because a full FM track already uses about 6.5-7 KB of its 8 KB. It also adds two intermediate slow speeds, 282 and 275 RPM.

The original Archiver/The Chip is a 6507 drive with 4 KB of ROM, single density only and code upload, and the Super Archiver as SD/ED/DD with code upload.

Using one today

  • For preservation, an Archiver-equipped drive can still map exactly how a protected original was laid out: bad sectors, duplicates, timing. That's the information protected-disk image formats such as ATX and PRO try to capture.
  • Emulation. Altirra emulates the Super Archiver including its slow-speed mode and the Bit-Writer add-on. RespeQt can emulate the Chip 810 and Super Archiver 1050 so period Archiver software can read and write real disks through an SIO2PC cable.
  • Compatibility. The Super Archiver is also US Doubler-compatible, so a modified drive still works as a fast double-density drive day to day.

Credits