Ice-T
- Year
- 1993
- Type
- Application
- Category
- Terminal emulator (VT102 / ANSI)
- Developer
- Itay Chamiel
- Requirements
- Ice-T XE: XL/XE with at least 128K RAM; Ice-T 800: 48K 400/800. A modem or serial device with an R: handler.
- Tags
- telecommunications, terminal, vt100, vt102, ansi, 80-column, zmodem, shareware, open-source, xl-xe
Overview
Most Atari terminal programs of the 1980s were built for Atari's own ATASCII bulletin boards. They struggled with the PC-style ANSI boards and Unix shell accounts that took over in the 1990s. Ice-T, written by Itay Chamiel and first released in 1993, was built for that world. It gives the Atari a careful VT102 emulation and an 80-column display you can actually read. It has also had an unusually long life: its author released new versions as recently as summer 2025.
Features
The full-featured Ice-T XE offers:
- Emulation: highly accurate VT102 and VT52, plus ANSI-BBS mode, with bold, blink and limited colour.
- Display: a readable 80-column text screen, designed to be legible even on a colour TV, with optional fine scrolling.
- Speed: up to 19,200 baud, normally without losing data.
- File transfers: downloads by XMODEM/CRC, XMODEM-1k, YMODEM, YMODEM-g and ZMODEM; uploads by XMODEM or plain ASCII.
- Buffers: a 16 KB capture buffer and a separate 16 KB scrollback buffer, so you can page back through a session.
- Convenience: fully menu-driven, up to 12 macros of 64 characters each, an auto-dialer with a 20-entry directory, print-screen and screen-dump-to-file.
- Viewers: a built-in text file viewer and a player for VT "animation" files.
Everything is driven from a pull-down menu bar with Terminal, Options, Settings, Mini-DOS and Transfer menus and a clock. The Options menu, for example, holds the dialer, key click, background colour, the 8-bit character set, cursor style, clock and timer settings, and a terminal reset.
Like most Atari terminal programs, Ice-T talks to the modem through an R: device handler. The 2.72 distribution makes this painless. It includes BOOT850.HND for the 850 interface and the other handlers from the BobTerm archive (credited to Bob Puff). Rename the one you need to RS232.COM, and Ice-T loads it automatically, but only if no R: device is already installed. Then binary-load ICET.COM. A quick check at startup sends you back to DOS with a notice if 128K of memory or an R: handler is missing. Ice-T 2.72 was distributed as shareware.
Squeezing 80 columns onto the screen means using characters only four pixels wide. Ice-T's source code is still a favourite place for programmers to find good 4×8 fonts.
Versions
| Version | Date | Notes |
|---|---|---|
| Ice-T 800 v1.1 | October 1994 | reduced feature set; runs on a 48K 400/800 |
| Ice-T XE 2.72 | February 1997 | full feature set; needs an XL/XE with 128K or more |
| Ice-T XE 2.73 | 14 April 2012 | revival release |
| Ice-T XE 2.74 / 2.75 / 2.76 | 24 Sep, 1 Oct, 10 Oct 2013 | rapid bug-fix series |
| Ice-T XE 2.8.0 / 2.8.1 / 2.8.2 | 1 June, 20 June, 13 July 2025 | current; distributed from github.com/itaych/Ice-T |
A famous bug, explained
For years some users saw Ice-T fill the screen with endless "j" characters in certain setups, and the blame usually fell on incompatible R: handlers. The real cause turned out to be different. Ice-T called the OS keyboard handler's GET BYTE routine directly instead of going through CIO. That routine quietly reads the IOCB's AUX1 byte from zero page (ICAX1Z), which CIO normally sets up. Whatever value happened to be left there decided whether the keyboard worked. The lesson for other programmers is that you can skip CIO, but then you have to recreate everything CIO would have done.
Using it today
- Pick the right build. Use Ice-T XE 2.8.x on any XL/XE with 128K or more, or on a 130XE in an emulator. The 800 version exists for 48K machines but lacks the extras.
- Emulators. Altirra emulates the 850 interface and modems that dial out over TCP/IP, so you can load an 850 handler, start Ice-T and
ATDTa telnet BBS or shell host. - SIO2PC/RespeQt users. Users have long asked for R: emulation in RespeQt so Ice-T could reach the internet through the PC. The experimental AspeQt-2k26 fork reports early success with Ice-T's own driver and BobTerm, while the standard A850 loader fails there.
- Wi-Fi modems / FujiNet. Any device that gives the Atari an R: handler and a Hayes-style modem works the same way: load the handler, run Ice-T, dial the host.
Use VT102 mode for Unix systems and ANSI mode for PC-style BBSes. For ATASCII boards, a native ATASCII program such as BobTerm is the better choice.
Credits
- Picture: Ice-T XE 2.72's pull-down menus, here the Options menu, drawn in its 80-column character set. — Screenshot of Ice-T XE 2.72's Options menu, running in the atari800 emulator (Atari8 site capture) from the Internet Archive disk image 'a8b_Ice_T_v2.72_1997_02_12_IceSoft_IL_SW_128k'
- comp.sys.atari.8bit FAQ (Michael Current): Ice-T entry in the terminal programs list — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge forum: CIO/K: handler discussion (Ice-T 'endless j' bug) — AtariAge forum members
- AtariAge forum: 4x8 fonts for 80 columns (Ice-T fonts and source) — AtariAge forum members
- AtariAge forum: AspeQt-2k26 (modem emulation tested with Ice-T and BobTerm) — AtariAge forum members
- AtariAge forum: sio2usb and ICE-T — AtariAge forum members
- Altirra emulator changelog — Screenshot from Avery Lee's Altirra page, virtualdub.org
- Internet Archive — Ice-T v2.72 (1997-02-12) disk image; ICET.DOC and program run in atari800 — Screenshot of Ice-T XE 2.72's Options menu, running in the atari800 emulator (Atari8 site capture) from the Internet Archive disk image 'a8b_Ice_T_v2.72_1997_02_12_IceSoft_IL_SW_128k', 1997
- GitHub — itaych/Ice-T README — GitHub project authors
