SIO2PC and RespeQt: Using Your PC as an Atari Disk Drive
Long before SD-card gadgets existed, Atari owners used the SIO2PC approach. A small interface joins the Atari's serial I/O (SIO) port to a PC's serial or USB port, and a program on the PC answers the Atari's disk commands as if it were one or more floppy drives. The Atari needs no special software, because it simply thinks it is talking to drives. That makes it the most compatible way to run downloaded ATR images on real hardware. It also lets you write images back to real floppies, or image your old disks.
This guide covers the hardware, setting up RespeQt (the current open-source server program), everyday tasks, and fixes.
You need: an Atari 400/800/XL/XE, an SIO2PC interface (USB is easiest), a Windows, Linux or macOS computer, and RespeQt.
1. A short history
- SIO2PC by Nick Kennedy (1989) was the original: a cable plus DOS software that emulated up to four drives. It also invented the ATR format.
- APE (Atari Peripheral Emulator) by Steven Tucker of Atarimax followed, for DOS from 1995 and Windows from 2000. It added up to eight drives, high-speed SIO, the protection-capable PRO format, and cassette playback. It is commercial and still sold with Atarimax interfaces.
- On Linux there were SIO2Linux and Matthias Reichl's AtariSIO
atariserver. On BSD and macOS, SIO2BSD and SIO2OSX. - AspeQt, written by Fatih Aygün with Qt, became the popular open-source choice. Its author describes it as inspired by Atari810, AtariSIO, APE and SIO2PC, but an original implementation. Around 2015–16 others forked it as RespeQt. JoSch added better printer emulation, and ebiguy added Happy/Super Archiver emulation and ATX support. The current releases are published from JoSch's GitHub repository. Version 5.4.1 added the first universal macOS binaries.
2. The hardware
Every interface does the same job: it converts the Atari's SIO signals to PC serial levels, and passes the SIO command line to a modem-control pin so the PC knows when a command frame starts.
- RS-232 cables: the classic DIY designs, built around a MAX232 (Kennedy's original) or 1489-type receiver chip, plug into a real DB9 COM port. Some users prefer them because the connectors screw down solidly and a native UART is easy for software to drive.
- USB interfaces: most are built on an FTDI FT232R USB-serial chip, and FTDI is the usual recommendation for reliable high speeds. Commercial options include the Atarimax USB SIO2PC (which uses its own microcontroller and is designed around APE) and Lotharek's SIO2PC-USB. Silicon Labs CP2102 and WCH CH340 adapters also work. Prolific PL2303 clones are the ones with a history of driver trouble.
- Placement: most SIO2PC plugs have no pass-through socket, so they go at the end of the SIO daisy chain. Real drives sit between the computer and the interface.
3. Installing RespeQt
- Download the release for your OS from the RespeQt GitHub releases page (linked from the AtariAge RespeQt/SIO2PC software forum). On Windows it is click-and-run, with no installer.
- Drivers: recent Windows and macOS versions include FTDI drivers. Otherwise install the chip maker's virtual COM port (VCP) driver. On Linux the adapter appears as
/dev/ttyUSB0or similar. Make sure your user can open it, usually by joining thedialoutgroup. - Plug in the interface and note its port name, for example
COM3,/dev/ttyUSB0, or/dev/cu.usbserial-…on a Mac.
4. Configure the serial port
Open Tools > Options and set:
- Serial I/O backend: Standard serial port, with your port name typed in exactly.
- Handshake method: this must match how your interface wires the command line. Options are RI (ring indicator), DSR, CTS, None, and Software (SIO2BT) for Bluetooth adapters. In practice, Lotharek's SIO2PC-USB needs DSR, many FTDI breakout builds work with any of DSR/RI/CTS, and Kennedy-style RS-232 cables commonly use RI. A wrong handshake is the single most common reason "nothing happens".
- Speed: start at 19,200 baud, the standard SIO rate. Once things work you can enable high-speed transfers. RespeQt supports up to roughly 6× SIO speed with a good FTDI adapter, but the Atari side must also support high speed: a high-speed SIO patch, SpartaDOS X, or an OS or drive upgrade that understands it.
- Write delay: a few milliseconds (10 ms is a common value with SIO2BT) helps some adapters.
The log window should then report something like "Emulation started through standard serial port backend on 'COM4' with RI handshaking."
5. Boot something
- Turn the Atari off. Connect the interface and start RespeQt.
- Mount an ATR in D1:: drag it onto the slot, or use the slot's mount button. Images can be mounted read-only or writable.
- Power on the Atari. For most disk games on an XL/XE, hold OPTION to disable BASIC. You should hear the familiar SIO beeps, and the log will show
[Disk 1] Get statusfollowed byRead sector 1, 2, 3….
Other things RespeQt can serve:
- Executables (XEX/COM/EXE): use Boot Atari executable. RespeQt supplies a small loader, optionally high-speed.
- Cassette images (CAS): playback emulates a program recorder. Hold START at power-on as you would for a real tape.
- Folder images: mount a PC folder as a simulated DOS 2.0S disk (read-only, bootable, also usable from SpartaDOS X). This is the quickest way to get a few loose files onto the Atari.
- Up to 15 drives (D9:–D15: are only usable under SpartaDOS X).
- PCLink gives SpartaDOS X 4.4x, and Ultimate1MB and Incognito firmware, direct read/write access to a PC folder.
- APETIME and the RCL client set the Atari's clock from the PC. An emulated printer is included.
- OS-B Translator: RespeQt can automatically activate a Translator when the image in D1: has "OS-B" in its filename.
6. Making a real floppy from an ATR
Your physical 1050 or 810 must not share a drive number with a RespeQt slot. The SIO drive ID is what tells devices apart on the bus.
- Leave RespeQt's D1: empty, or switch the slot off, and set the real drive to D1:. Put a blank disk in it.
- Mount the ATR in RespeQt as D2:.
- Boot a DOS or sector copier from the real drive (or boot from RespeQt first, then swap the assignments). Copy sector by sector from D2: to D1:, for example with MyDOS's Duplicate disk option. A file copy will not reproduce boot sectors or loaders that bypass DOS.
Going the other way, imaging a real floppy to ATR, works the same with source and destination swapped. You can also use RespeQt's Happy 810/1050 or Chip 810/Super Archiver 1050 emulation with a suitably modified drive, which captures protected disks as PRO or ATX.
Troubleshooting
- The Atari never boots from the PC (drive grinds, then BASIC or Self Test appears): check the port name, then try every handshake option in turn, then drop to 19,200 baud. This cures nearly every case.
- Only works at 19,200: your Atari or adapter can't keep up. Leave high speed off, or try a better FTDI adapter. One 130XE owner reported 38,400 baud working only about 20% of the time and suspected his machine's SIO port.
- Conflict with a real drive: two devices answering the same Dn: number corrupt each other's replies. Change one of them.
- Copied disk won't run: use a sector copy, not a file copy. Check whether the program needs BASIC on or off, or an OS-B machine.
- Garbled at high speed with other SIO devices attached: don't use the None or Software handshakes when other SIO devices share the chain, as glitches are expected in those modes. Use a hardware handshake (RI/DSR/CTS) instead.
- Mac or Linux sees the adapter but RespeQt doesn't: make sure you have the right device node (
/dev/cu.*on macOS) and permission to open it. Disable other serial programs that might hold the port. - Can I connect a real drive to an emulator instead? No: SIO timing tolerances are below a millisecond, which a desktop OS can't guarantee during emulation. Image the disk first, then mount the image.
Further reading
- The FAQ section 3.4.1 lists every PC, Mac, Linux, Android and Bluetooth SIO server ever released, with links.
- The AtariAge RespeQt / SIO2PC Software sub-forum is where releases and builds are announced.
- See also our guides to FujiNet, SD and flash devices and disk image formats.
Credits
- comp.sys.atari.8bit FAQ (Michael Current) — 3.4.1 'How can my Atari utilize my other computer's mass storage?' — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge RespeQt forum — 'How to get started with RespeQt?' — AtariAge forum members
- AtariAge RespeQt forum — 'Lineage and features of RespeQt' — AtariAge forum members
- AtariAge RespeQt forum — 'Troubleshooting sio2pc Serial (Mac but could apply elsewhere)' — AtariAge forum members
- AtariAge RespeQt forum — 'Different types of SIO2PC hardware' — AtariAge forum members
- AtariAge RespeQt forum — 'Where in the chain should a 1050 be positioned?', 'Trouble copying software from RespeQt to Atari 1050', 'How to create bootable floppies using .atr files?', 'RespeQt 5.4.1 released' — AtariAge forum members
- Altirra 4.40 help — FAQ: physical drives over serial adapters — Avery Lee (Altirra)
