SD-Card Drives, IDE Carts and Flash Multicarts: A Buyer's and User's Guide
You no longer need a working 1050 and a box of floppies to use a real Atari. A whole family of modern devices now loads software from SD or CompactFlash cards: some plug into the SIO port, others into the cartridge slot, and a few go inside the machine. This guide sorts them into types, explains what each can and can't run, and gives the setup steps they share.
You need: an Atari 400/800/XL/XE, an SD or CF card (FAT-formatted; FAT32 for most modern devices), and a PC to copy ATR, XEX, CAS or CAR files onto it.
1. The three families
A. SIO-port drive emulators
These look like disk drives to the Atari. The OS just sees D1:, D2: and so on answering over the serial bus, so they work with any computer model, any DOS and most software, with no modifications. Their limit is the SIO bus speed: standard 19,200 baud, or faster if both the device and the Atari's software support a high-speed mode.
| Device | Highlights |
|---|---|
| SIO2USB (ABBUC Frankfurt, 2003–07) | USB flash drives; up to 3 drives; LCD + keys; real-time clock; SIO-powered |
| SIO2SD (open source, 2007) | MMC/SD/SDHC, FAT12/16/32; ATR read/write, XFD and XEX read-only; 16×2 LCD file browser; up to 15 drives plus 100 virtual "V0–V99" slots; XF551-style turbo; built by several makers |
| SDrive (C.P.U., 2008) and descendants | Cheap ATmega8 design with no LCD, controlled by an Atari-side program; 4 drives; 128- or 256-byte sectors, images up to 16MB; transfer rates up to 128 kbit/s. Successors: SDrive-NG (2014, SDHC/FAT32), SDrive-MAX (2017, Arduino Uno + 2.8" touchscreen), SDriveARM, SDrive Micro, NUXX |
| SIO2Arduino (2012), SIO2MicroSD (2013) | Arduino-based; SIO2Arduino also handles many PRO and ATX images |
| FujiNet (2019–) | Micro-SD and Wi-Fi/TNFS network servers; D1:–D8:, cassette, printers, the N: network device; ATR, ATX, XEX, CAS. See our FujiNet guide |
| A8PicoSIO (2024–) | Raspberry Pi Pico; 4 drives + C:; ATR read/write, ATX, CAS (all chunk types, including turbo systems), WAV tapes; optional "accurate 1050/810" ATX mode |
| sio2flip | Flipper Zero app; four drives, US Doubler and XF551 high-speed modes |
ATX support matters if you want to run original copy-protected disks. Protection checks rely on sector timing and deliberate errors, which ATR images can't represent (see our image formats guide). FujiNet, A8PicoSIO, AVGCART (below) and SIO2Arduino list ATX support. SIO2SD and SDrive work with plain ATR/XFD, so they need cracked or unprotected versions.
B. Cartridge-slot storage (SD/CF "hard disks")
These plug into the cartridge port and talk to the CPU directly, which makes them much faster than SIO. They usually ship with SpartaDOS X on board and a loader menu for launching ATRs, XEXs and cartridge images.
- SIDE (2011) and SIDE2 (2012): CompactFlash, an on-board SpartaDOS X, real-time clock, and switchable Loader/SDX modes. SIDE2 adds CF hot-swap and a programmable button. Jonathan Halliday's SIDE Loader and SDX drivers are the usual software.
- SIDE3 (2020–): SD card, emulation of many cartridge types up to 1MB, 8MB flash and 2MB SRAM, and a battery-backed clock. It can mount cartridges, ATRs and partitions from one menu. It also plays audio files (PDM/"FujiConvert" format), and its special RAM-based OS lets it boot some ATRs without an Ultimate1MB.
- AVGCART (2018) and its SUBCART variant (2023): an FPGA SD multicart for XL/XE (but not the 1200XL). It emulates SIDE2 for SpartaDOS X. An optional SIO cable adds full ATR, ATX and CAS (including turbo tapes) support.
- MyIDE-II (Atarimax, 2012): CompactFlash, a FAT32 loader for XEX, ATR and converted cartridge images, 512K flash, 512K SRAM, and Mr-Atari's MyBIOS.
C. Flash cartridges and multicarts
A flash cartridge is a re-writable ROM cart. It stores one large program or a menu of many. Common formats and boards:
- Atarimax MaxFlash, in 128K and 1MB versions. Both use 8K banks that appear at $A000 and can be switched off to expose the RAM underneath. They can be flashed from a PC with Atarimax's USB programmer, or from the Atari itself with no extra hardware. Many homebrew cartridge releases target this format, and it supports saving to flash. AVGCART and SUBCART emulate MaxFlash saving.
- SIC! cartridges (sic.pigwa.net). Most cartridge-emulating multicarts support the SIC! format, including Ultimate Cart, AVGCART and The!Cart.
- SD multicarts such as Ultimate Cart, The!Cart, AVGCART and the Raspberry Pi Pico-based A8PicoCart load cartridge images (and often XEX files) from a card. Owners run MAC/65, Atari BASIC revision C, SpartaDOS X and cartridge-format releases of Turbo BASIC XL from them. The A8PicoCart firmware can also emulate a disk drive, by installing a soft OS, on machines with at least 64K.
Internal upgrades
Ultimate1MB (XL/XE) adds memory expansion, flashable OS and BASIC images and SpartaDOS X. Incognito, a replacement personality board for the 800 with firmware by Jonathan Halliday, adds SpartaDOS X and built-in CompactFlash storage. With a SIDE cart they form the most powerful setups. Under Ultimate1MB, OS, BASIC and memory choices are made in its own BIOS menu (HELP+RESET). This is also how Altirra emulates it.
2. Setting one up: the common steps
- Prepare the card. Format it FAT32 (some older SDrive designs want FAT16 and ≤ 2GB). FujiNet's own advice is a card of 32GB or less. Make folders such as
GAMES,DEMOSandTOOLS, because huge flat directories are slow on 8-bit menus. - Copy files. Use ATR for disks, XEX for single-file programs, CAR (or raw ROM plus the right type) for cartridges, and CAS for tapes. Keep names short. Many menus show 8.3 or truncated names.
- Pick the boot device. On SIO devices, whatever answers as D1: at power-on is booted. On SIO2SD, use the keys and LCD (K1 to select the slot, then Shift+Enter until "– OFF –") or the CFG program to disable a slot. FujiNet only answers as D1: if nothing else does.
- Mind BASIC. On XL/XE machines, hold OPTION at power-on for most games, exactly as with floppies.
- For cartridge-slot devices, switch to Loader mode (SIDE) or the menu (multicarts), pick the file, and let it reboot.
3. Choosing
| If you want… | Consider |
|---|---|
| Maximum compatibility with any model, including a 400/800 | An SIO device: SIO2SD, SDrive-MAX, FujiNet, A8PicoSIO |
| Copy-protected originals (ATX) | FujiNet, A8PicoSIO, AVGCART with SIO cable |
| Networking, online servers, modern apps | FujiNet |
| Speed, a "hard disk", SpartaDOS X | SIDE2/SIDE3, AVGCART, MyIDE-II (with Ultimate1MB for the full experience) |
| Cartridge games and ROM tools | A flash multicart: AVGCART, Ultimate Cart, The!Cart, A8PicoCart |
| Developing a cartridge release | MaxFlash format (cheap blank carts, supported by most multicarts and emulators) |
| Tape-era European software | A8PicoSIO, AVGCART, FujiNet (CAS) |
Troubleshooting
- Device not detected / boot loops: another SIO device is also set as D1:. Turn one off or renumber it.
- Game loads, then crashes: BASIC is on (hold OPTION), the game needs OS-B (see our XL/XE compatibility guide), or it needs more RAM than you have.
- Copy-protected ATR fails: that's expected. Use an ATX on a device that supports it, or a cracked release.
- Glitches with several SIO devices chained: keep high-speed or power-hungry devices close to the computer, and power them externally rather than from the SIO bus. Some modern devices skip the soft-start parts Atari fitted to its own SIO-powered peripherals.
- A specific game misbehaves only with Ultimate1MB: One known case: Bounty Bob Strikes Back reads the joystick through a PORTA shadow at $D3F0, which the U1MB blocks.
- Cartridge image shows garbage: wrong cartridge type. Use CAR files, or select the mapper manually.
Further reading
- The comp.sys.atari.8bit FAQ, sections 3.2.8, 3.3.4 and 3.3.5, is the definitive list, with links to every project's home page and current sellers.
- Our guides to FujiNet, SIO2PC/RespeQt and disk image formats.
Credits
- comp.sys.atari.8bit FAQ (Michael Current) — 3.2.8 modern storage as floppy drives, 3.3.4 IDE/CompactFlash, 3.3.5 SD cards — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge — 'So, what's the most common cart hardware to produce games for?' (2025) — AtariAge forum members, 2025
- AtariAge — 'Cartridge Version(s) of Turbo Basic XL' (SIC! format support) — AtariAge forum members
- AtariAge — 'Cartridge formats with SRAM or equivalent?' and 'Booting SpartaDOS X (on A8PicoCart) with Fujinet' — AtariAge forum members
- FujiNet wiki — Atari FujiNet Quickstart Guide (coexisting with SIO2SD and other devices) — FujiNet project
- Altirra 4.40 help — Disk drives (copy protection), FAQ (Ultimate1MB), Program-specific issues — Avery Lee (Altirra)
