Turbo-Freezer XL (and Turbo Freezer 2005/2011)
- Year
- 1987
- Type
- Upgrade
- Category
- Freezer cartridge / PBI multi-function device (XL/XE)
- Manufacturer
- Bernhard Engl (1987); remakes by Matthias Reichl and team for ABBUC (2005, 2011)
- Tags
- freezer, pbi, eci, xl-xe, ram-expansion, debugger, cartridge-emulation, bernhard-engl, hias, abbuc, germany
Overview
The Turbo-Freezer XL was the first real "freezer" for the Atari 8-bit. It came from Bernhard Engl of Munich, also the designer of the 1050 Turbo, in 1987. Plugged into the 800XL's parallel bus, it adds a red button. Press it, and the running program stops at the next interrupt and a menu appears. From there you can save a complete snapshot of the machine (memory and the write-only hardware registers) to disk, cassette or RAM disk, poke around with a resident debugger and mini-DOS, then carry on as if nothing had happened, or reload that snapshot days later. The same board could also carry the Oldrunner (Atari 400/800 OS rev. B) and up to 256 KB of extra RAM, taking an 800XL to 320 KB.
Engl's manual opens with over a year of development, hundreds of used-up chips, 5,300 lines of assembler and "five-figure costs". In 2004 he allowed ABBUC to remake the design. Matthias "Hias" Reichl and a team produced the Turbo Freezer XL/XE 2005, which won the ABBUC Hardware Contest 2005, and then the redesigned Turbo Freezer XL/XE 2011, produced from autumn 2012.
Specifications
| Item | Turbo-Freezer XL / XL 2 (1987) | Turbo Freezer XL/XE 2005 | Turbo Freezer XL/XE 2011 |
|---|---|---|---|
| Design | Bernhard Engl | Matthias Reichl, Guus Assmann and team (ABBUC) | Matthias Reichl and Wolfram Fischer |
| Connection | 800XL/600XL parallel bus | PBI (XL) | PBI or ECI via adapter boards with PBI pass-through |
| Logic | Three ASICs (replacing 40+ TTL chips) | Lattice M4A5 CPLD | Xilinx XC95144XL CPLD |
| Software store | EPROM (socket takes 16K) | 512 KB flash (64 KB freezer) | 1 MB flash |
| RAM | Optional 64/128/256 KB expansion | 128 KB (16 KB reserved; snapshots possible) | 1 MB battery-backed, including a switchable 512 KB RAMBO-compatible expansion |
| Extras | Optional Oldrunner (400/800 OS) | Cartridge emulation (8K, 16K, OSS, SDX) | Adds Atarimax-style banking, stackable SDX carts, stereo POKEY support |
| Power | PBI, joystick-port pin 7 lead, or internal | PBI/ECI or joystick port | PBI/ECI or joystick port |
How it works
The freezer watches the computer's address bus and shadows every write to the hardware registers. That's the clever part: ANTIC, GTIA and POKEY registers are mostly write-only, so a program's screen and sound setup can't normally be read back. When you press the button, the freezer swaps in its own memory at the next interrupt, saves the machine's state, and runs its menu without disturbing the frozen program's RAM. Resuming restores registers and memory and returns to the exact instruction.
From the 1987 menu:
- SPACE resumes the program.
- S saves the frozen program to cassette (as a boot tape or a file) or disk (default filename
CORE), and R saves it to the RAM disk. Snapshots reload and resume automatically. - Z clears the RAM under the OS for 48K programs, which shrinks saved files by 25-50%.
- D enters the built-in DOS and debugger. Neither uses any of the Atari's own RAM.
- RESET cold-starts and switches the freezer off cleanly.
Engl pitched it at gamers (a pause button and save positions for any game), cassette owners moving tape software to disk, people backing up protected disks as ordinary files, and programmers tracking down bugs with the full machine state in view. A program that never uses interrupts can't be frozen with the button, and Engl suggested fitting a non-maskable SYSTEM RESET key for those.
The RAM expansion uses its own PORTB banking scheme (bits 2-5). It has a 130XE-compatible 128 KB mode, and an extra HALT wire gives true independent ANTIC access. The 2011 model's 512 KB expansion is RAMBO compatible instead.
The remakes
Reichl started from Engl's design notes. To make programming the chip possible, the 2005 team switched from an EPROM to flash, which turned into cartridge emulation: spare flash and RAM can act as standard, OSS or SpartaDOS X cartridges. The debugger grew block move, compare and search commands, a memory map, OS-vector and handler displays, printer logging, SIO commands and remote control of the AtariSIO PC server. The 2011 version kept the freezer logic compatible, so the same software runs on both, and brought back the RAM expansion from the 1987 original. All schematics, CPLD sources, software and the English and German manuals are published on Hias' Turbo Freezer site.
Using it today
- Power. On an 800XL that doesn't supply power on the PBI, plug the lead into pin 7 of joystick port 2, or wire it internally.
- Don't freeze during I/O. Freezing mid-disk-access can leave the operation incomplete, and tape operations can't be retried at all.
- Snapshots are hardware-specific. A snapshot stores the whole machine, so restore it on a similar configuration.
- The 2011 model coexists with PBI hard-disk interfaces through its pass-through and fits XE machines via the ECI adapter. SpartaDOS X builds for it are available.
Compatibility
- Computers: 600XL (64 KB) and 800XL for the 1987 original. All XL/XE with PBI or ECI for the 2011 model.
- Software: practically anything that uses interrupts can be frozen. The Oldrunner position runs 400/800-only software.
- Related: Engl's 1050 Turbo drive upgrade. The original freezer's built-in DOS supports its Turbodrive high speed.
Credits
- Turbo-Freezer XL manual (Bernhard Engl, 1987), ABBUC reprint 2004 (German), Internet Archive — Internet Archive, 1987
- Turbo Freezer XL/XE 2011 manual, software version 3.10 (English, 2013), turbofreezer.horus.com — turbofreezer.horus.com, 2011
- Matthias Reichl (Hias) Atari page: Turbo Freezer XL/XE 2005 and 2011 — horus.com, 2005
- comp.sys.atari.8bit FAQ (Michael Current), section 6.12 (Turbo-Freezer bank-selection types) — Michael Current (comp.sys.atari.8bit FAQ)
