Supra 1200AT and SupraModem 2400
- Year
- 1987
- Type
- Peripheral
- Category
- Hayes-compatible modems (1200 and 2400 baud)
- Manufacturer
- Supra Corporation (Albany, Oregon)
Overview
Supra Corporation grew out of Microbits Peripheral Products. After the joystick-port 300-baud modems it moved Atari owners to faster, Hayes-compatible models. The 1200AT (1987) plugged straight into the SIO bus. The SupraModem 2400 (1988) was a full Hayes-compatible 300/1200/2400-baud modem that could use the Atari 850, ICD's P:R: Connection or Supra's own SupraVerter cable. In the late 1980s it was one of the cheapest ways to reach 2400 baud on an 8-bit Atari.
Models
| Model | Year | Speeds | Commands | Connection | Notes |
|---|---|---|---|---|---|
| Supra 1200AT | 1987 | 300 (Bell 103) / 1200 (Bell 212A) | 8 Hayes AT commands | SIO | Same unit as E+E DataComm's Avatex 1200; tone or pulse dial; no speaker; Smart Terminal disk |
| SupraModem 2400AT | 1988 | 300/1200/2400 (Bell 103, 212A, V.22, V.22bis) | Fully Hayes-compatible | SIO via the included SupraVerter, or 850/P:R: | Speaker, auto-answer, tone/pulse dial; Smart Terminal disk |
SupraModem 2400 in detail
Antic reviewed the SupraModem 2400 in June 1988 at $179.95 for the modem alone, or $199.95 with cables and software. - About 1 inch high, 4⅝ inches wide and 6½ inches long, small enough to stack. The back has a 9 V power jack, a female RS-232C port, and LINE and PHONE sockets. - Eight front-panel lights: HS (2400 baud), AA, CD, OH, RD, SD, TR, MR. - A 64-page manual covers commands, S-registers, auto-dial and auto-answer, diagnostics and result codes. - Speaker volume has three levels plus off, set by command instead of a knob. - For BBS use it answers automatically, hangs up afterwards, and changes baud rate under software control.
The reviewer had no hardware trouble. Long 2400-baud XMODEM transfers failed twice over a noisy shared office line, which he blamed on the line. He judged it "a good product" for the price. Antic's January 1988 Shoppers Guide said it was about half the size of Hayes' own 2400-baud modem.
Connecting it to an Atari
There are two routes: 1. 850 or P:R: Connection. Use a standard modem cable. Any terminal program written for the 850 R: handler sees a normal Hayes modem. 2. SupraVerter (R-Verter). This cable converts the Atari's SIO port to RS-232 for the modem. It comes with R: handlers to load. The SupraVerter began as the R-Verter from Advanced Interface Devices. It uses the SIO motor-control line, so only one such device can be on the bus.
Using one today
- A 2400-baud Hayes modem is still handy as a known-good RS-232 device for testing an 850, P:R: Connection or MIO serial port.
- The same R: handlers and terminal programs work with modern Hayes-command "Wi-Fi modems" connected the same way, which is how most people use period BBS software online now.
Credits
- Picture: The SupraModem 2400. — Photo from Gury's Atari 8-bit Forever portal (SupraModem 2400) (Unknown, used for identification)
- Antic Vol. 7 No. 2 (June 1988), Atari SX212 and SupraModem 2400 (Gregg Pearlman review) — AtariMagazines.com (Kevin Savetz), 1988
- Antic Vol. 6 No. 9 (January 1988), Sixth Annual Antic Shoppers Guide: Supra 300/1200/2400 — AtariMagazines.com (Kevin Savetz), 1988
- comp.sys.atari.8bit FAQ (Michael Current), sections 5.1.2 (1200AT, SupraModem 2400AT) and 5.1.3 (R-Verter/SupraVerter) — Michael Current (comp.sys.atari.8bit FAQ)
