CDY Omniview (80-column OS ROMs)

Year
1984
Type
Upgrade
Category
Replacement OS / extension ROM with 80-column display
Manufacturer
CDY Consulting (Richardson, Texas)
Cover of the Omniview XL/XE manual from CDY Consulting

Overview

Real 80-column text on an 8-bit Atari usually meant buying a video card such as the Bit 3 Full-View 80, the Austin 80 or Atari's later XEP80. Omniview from David Young's CDY Consulting, makers of Omnimon, did it in firmware instead. It's a replacement or extension ROM that adds new E: (editor) and S: (screen) handlers. They draw characters only 3 pixels wide on an ANTIC mode F (BASIC GRAPHICS 8) screen, which is just wide enough for 80 columns. Any program that prints through the OS's E: device then appears in 80 columns, and software can also call Omniview's screen routines directly. Antic's 1987 word-processor roundup noted that Letter Perfect, its own house word processor until PaperClip, "could be used with the OmniView 80-column card".

Versions

Version Year Machines Contents
Omniview (400/800) 1984 400/800, in the $C000 block (Ramrod or Omnimon board) 80-column E:/S:, Axlon RAM disk up to 1 MB; 4K or 8K (with Omnimon)
OmniviewXL 1984 600XL/800XL OSNXL OS + Fastchip floating point + 80-column handlers + ATRMON terminal for the ATR8000
Omniview XL/XE (Omniview XE) 1985 XL/XE Cal Com's modified XL OS (high 400/800 compatibility) + Fastchip + 80 columns + ATRMON + 64 KB 130XE RAM disk
Omniview 256 1986 XL/XE As XL/XE plus a 192 KB PORTB RAM disk, for the Newell 256KXL
OMNIDOS 400/800 Wordmark's ROM-DOS plus standard Omniview on one 8K chip

Bundled software

1985 units came with SpeedScript 80, an 80-column version of SpeedScript 3.0. From 1986 the bundle became OmniWriter, plus a patch for AtariWriter Plus, patch instructions for the 80-column versions of LJK Letter Perfect and Data Perfect, and OmniTerm, a terminal program based on VT-10-Squared. A VT100 emulator with Kermit (later sold as OmniCom, without needing Omniview) was available separately. Antic listed Omniview at $69.

How it works

Because the text is drawn as bitmap graphics, Omniview needs no extra hardware and works on any TV or monitor. The price is about 8 KB of RAM for the GRAPHICS 8 screen, and narrow characters that need a sharp display to read. The XL/XE versions are complete replacement OS ROMs: the Omniview XL/XE ROM removes the cassette handler, swaps CONTROL+1 for HELP and reverses OPTION's meaning at power-up. The RAM-disk handler is built into the ROM. In 1988 an Antic reader used Omniview 256's "Install 1" option to make his RAM disk drive 1, so AtariWriter Plus's Proofreader and Mail Merge loaded instantly.

Using one today

  • On an XL/XE, Omniview ROMs go in the OS socket, ideally with a switch or an OS switchbox so you can return to the stock OS. Antic reviewed a six-way OS switchbox in 1988 with Omniview 80 among the chips users might fit.
  • Use a monitor with good sharpness (composite or S-Video). On an RF-connected TV the 3-pixel characters are hard to read.
  • Omnimon and Omniview firmware can be loaded onto the modern Atari 800 RAMROM personality card.

Credits