Magna Systems RAMcharger
- Year
- 1986
- Type
- Upgrade
- Category
- Memory upgrades (Atari 800 plug-in boards; XL/XE factory installs)
- Manufacturer
- Magna Systems (Flushing, New York)
- Tags
- memory-upgrade, atari-800, 130xe, 800xl, 1mb, axlon-compatible, magna-systems, mydos, ram-disk
Overview
Antic's July 1987 review began: "It is strangely satisfying to use an old Atari 800 with more memory than a 1040ST." Magna Systems' RAMcharger for the 800 is a single board that drops into the middle RAM slot under the 800's top lid. In its largest form it holds 1 MB of extra memory, banked the Axlon way. Magna also sold 256K upgrades for the 600XL, 800XL and 1200XL, and 320K, 576K and 1088K upgrades for the 130XE, but insisted on installing those itself. Every package included MYDOS, which can use all the installed memory as a RAM disk.
Range and prices
| Version | 1986 price | 1987-88 price |
|---|---|---|
| Atari 800, 256K | $149.95 | $149.95 |
| Atari 800, 512K | $199.95 | $199.95 |
| Atari 800, 1 MB | $299.95 | $299.95 |
| 800XL/1200XL (and 600XL), 256K | $100-$120, installed | |
| 130XE, 320K / 576K / 1088K | $120 / $180 / $280, installed |
(Prices from Antic's Shoppers Guides and the July 1987 review. Magna also sold an ST memory upgrade.)
Specifications (800 board)
| Item | Value |
|---|---|
| Slot | 800 middle RAM slot, with standard 16K boards (or a modified 32K board) around it |
| Banking | Axlon-compatible, 16 KB banks |
| Total system | 1,032 KB with the 1 MB board (reviewer's figure) |
| Power | From the 800's 12 V rail, regulated to 5 V on the board |
| Switch | Turns the expansion off for programs that need a stock machine |
| Build | Piggy-backed RAM chips, tantalum capacitors, gold-plated connector |
History and reception
Reviewer Charles Cherry tested the 1 MB board and praised its construction as "meticulously assembled, using the highest quality parts". He warned that the piggy-backed chips sit close to the card in slot three, and suggested a 3x5 index card as a spacer. He saw the real uses as a huge RAM disk for BBS operators (over 8,000 sectors), for programmers running compilers and assemblers, and for anyone who could keep unprotected programs loaded permanently. A few commercial programs used the memory directly: SynFile+ and SynCalc (about 288 KB), PaperClip 2.0 (320 KB on XL/XE) and a Magna patch for AtariWriter Plus.
In Antic's November 1988 memory survey, Lee Brilliant found a quirk. The 800 board responded not only to the Axlon addresses but also to some zero-page addresses, which could upset some programs. Magna's fixes were the on/off switch or an extra jumper wire to the ROM board in slot 1. Magna's XL upgrades keep ANTIC in main memory, like Newell's. He also noted that the 130XE's extra bits for 576K and 1088K cost the Self Test (576K) and internal BASIC (1088K).
Using one today
- The 800 version needs no soldering. Pull the middle RAM card, insert the RAMcharger and keep it clear of the neighbouring cards.
- Set MYDOS to Axlon mode on an 800, or to the matching PORTB layout on an XL/XE.
- If a program misbehaves, flip the switch off. Copy-protected and autobooting software usually can't run from a RAM disk anyway, as the 1987 review pointed out.
Credits
- Picture: A RAMcharger board installed in an Atari 800, from Antic's July 1987 review. — Product photo from Antic, July 1987 (atarimagazines.com)
- Antic Vol. 6 No. 3 (July 1987), Product Reviews: RAMcharger (Charles Cherry) — Product photo from Antic, July 1987 (atarimagazines.com), 1987
- Antic Vol. 7 No. 7 (November 1988), Dr. Brilliant's Incredible Atari Brain Transplants — AtariMagazines.com (Kevin Savetz), 1988
- Antic Shoppers Guides, December 1986 and January 1988 — AtariMagazines.com (Kevin Savetz), 1986
- comp.sys.atari.8bit FAQ (Michael Current), section 6.12 (Magna Systems Ramcharger entries) — Michael Current (comp.sys.atari.8bit FAQ)
