Newell 256KXL and Meg XL Memory Upgrades

Year
1985
Type
Upgrade
Category
Internal memory upgrades (XL/XE, 256 KB to 4 MB)
Manufacturer
Newell Industries (Plano, later Wylie, Texas)

Overview

Newell Industries was a Texas company with a long Atari history. Its first product, in 1981, was Fastchip, a fast floating-point ROM. It went on to the Ramrod OS board for the 800 and an 850-alternative interface. In 1985 it brought out one of the first commercial XL memory upgrades, the 256KXL for the 800XL and 1200XL. It was a rival to ICD's RAMBO XL and shipped with MYDOS, which Newell configured for its own bank layout. Around 1990-91 Newell followed it with the 1 Meg XL, then the Meg XL, Meg 65 and Meg 130, which could take an XL or XE to 1 MB or even 4 MB. That was the largest memory any commercial 8-bit Atari upgrade offered.

Products

Product Year Machines Memory Notes
256KXL 1985 800XL, 1200XL 256 KB "Newell" bank type; ANTIC sees main memory only; ANTIC revision "E" (C021697) required
256KXLE c. 1991 800XL, 1200XL 256 KB Replaced the 256KXL; true ANTIC banking; MYDOS 4.5x and COPY256E
1 Meg XL 1990 800XL, 1200XL 1,088 or 1,072 KB Three install methods with different trade-offs
Meg XL / Meg 65 / Meg 130 1991 800XL/1200XL, 65XE, 130XE 1 MB or 4 MB MYDOS 4.50 M1 and M1Copy

How it works

All of these switch extra 16 KB banks into the $4000-$7FFF window through spare bits of the PIA's PORTB register, as the 130XE does. The details differ:

  • The original 256KXL uses PORTB bits 2, 3, 5 and 6, giving twelve extra banks. Bit 5 is used with the opposite sense to RAMBO, so the two aren't bank-compatible. Main memory is protected from being banked, and ANTIC always reads main memory. An optional switch lets you choose manually whether ANTIC follows the banked memory. Newell also documented two modifications: true ANTIC banking, and making main memory (including RAM under the OS) bankable.
  • The Meg boards in 1 MB form use PORTB bits 1, 2, 3, 5, 6 and 7. Internal BASIC and the Self Test can then be switched out by software, and a toggle switch can be fitted to keep BASIC available. The 4 MB version uses all eight PORTB bits, which costs access to 16 KB of main memory and the RAM under the OS.

History

In Antic's November 1988 survey of memory upgrades, Lee Brilliant ranked the 256KXL with RAMBO XL and Magna's RAMcharger as the three "professional" XL upgrades. All delivered "high quality at a low price", and Newell's was $39.95 without RAM chips. In his tests it ran every program he tried, though PaperClip got 700 fewer text lines than on a RAMBO. He found installation fussier: five wires to the PIA (he wished Newell had used a ribbon cable like ICD's) and three jumpers. Older ANTIC chips (C012296) can't refresh the 256K RAMs, so Newell required them to be replaced. MYDOS shipped configured for the Newell layout.

Users built on it. A 1988 Antic letter describes running AtariWriter Plus from a RAM disk on a Newell-upgraded 800XL by using the Omniview 256 ROM's RAM-disk handler. Omniview 256 itself was marketed for 800XLs with the 256KXL.

Using one today

  • Know your bank type. Newell's bit-5 polarity differs from RAMBO and the Atari Magazin-style 320K boards. Use a DOS or RAM-disk driver set for "Newell" (MYDOS can be, and SpartaDOS's RD.COM was patched by Newell as RDNEW.COM).
  • Check the ANTIC chip before fitting a 256KXL to an early machine.
  • On Meg-series machines, expect internal BASIC to be switched off by the memory mapping unless the BASIC switch was fitted. Use a cartridge BASIC if needed.

Credits