Atari in France: Péritel 400/800, the PVP80 and the SECAM Machines
- Year
- 1982
- Type
- Computer
- Category
- Regional versions for French (SECAM / Péritel) televisions
- Manufacturer
- Atari, Inc. (adapted by P.E.C.F. Atari, France) / Atari Corp.
Overview
France was the awkward market for every early home computer. Its televisions used SECAM, a colour system unlike the NTSC and PAL that Atari's chips were designed for, and most French TVs of the early 1980s could not show a PAL picture at all. They did, however, have the Péritel socket (known elsewhere as SCART), which accepts RGB. Atari's French subsidiary, P.E.C.F. Atari, worked around the problem in three stages: RGB-modified PAL machines, an external adapter, and finally genuine SECAM computers.
Stage 1: the Péritel 400 and 800
At the SICOB show in Paris-La Défense (22 September – 1 October 1982), P.E.C.F. Atari launched the 800 in France at 6,500 F with 16 KiB or 7,500 F with 48 KiB, and introduced the 400 at 3,800 F; the 400 shipped in January 1983. Both were PAL B machines modified locally to add an RGB output for Péritel sets:
- 400 and early 800 "PTL" units have a second permanently attached TV cable ending in a Péritel plug.
- Later 800 Péritel units instead have an 8-pin DIN RGB socket on the left side towards the rear, driven by an internal Péritel adaptor board (CA061034), with a separate cable to the TV.
The catch was colour. The RGB signal was derived only from GTIA's luminance levels, ignoring its PAL hue information, so the Péritel machines could show just eight colours. The Péritel cable carries red, green, blue, sync, mono audio, +12 V "slow switching" (to put the TV into AV mode) and a fast-switching line selecting RGB. These machines are rare today.
Stage 2: PAL XLs and the PVP80
When the 600XL and 800XL were launched in France in March 1984 (2,200 F and 3,200 F for the PAL versions), native SECAM versions were promised for June but were late. Atari sold unmodified PAL machines, since PAL-capable televisions were becoming common, and offered the Adaptateur PAL/Péritel PVP80, made by the Compagnie Générale de Vidéotechnique (CGV). It plugs into the XL's standard 5-pin monitor port and delivers RGB and audio to a Péritel socket.
Stage 3: true SECAM machines
| Model | Released in France | Notes |
|---|---|---|
| 600XL SECAM ("Pauline") | Announced at 2,500 F | Never shipped |
| 800XL SECAM ("SECAM ROSE" board) | November 1984, 2,499 F (1,700 F by February 1985) | PAL ANTIC "B", FGTIA, no RF output or channel switch, internal colour/mono switch, SECAM 6-pin monitor socket, cable to Péritel supplied |
| 130XE SECAM | 1985, 1,990 F (June 1985), 1,490 F (February 1986) | Colour/mono switch on the back; also sold packaged with a 1050 |
| XE Game System SECAM | After the XEGS launch (1987) | Sold in the XE 5001 package with XG-1 light gun, Bug Hunt and a joystick |
These machines use the FGTIA, a SECAM version of GTIA, with a PAL ANTIC, so they run PAL software. The SECAM 800XL was engineered by Charles "Pete" Gerrard and Dan H. Kramer. The 6-pin DIN monitor socket carries SECAM composite video, separate audio for Péritel and for an RF modulator, +12 V for the SCART switching line and +5 V for a modulator. There is no TV aerial output at all.
Compatibility
- Software: the SECAM machines behave like PAL ones, with two exceptions: GTIA mode 9 shows only 8 grey levels instead of 16, and FGTIA samples joystick triggers once per scan line, which can upset some bank-switched cartridges on XL/XE models (trigger 3 doubles as the cartridge-present signal).
- The Péritel 400/800 are PAL machines internally and run all PAL software; only their video output differs.
- No artifact colours on SECAM: colour is frequency-modulated, so NTSC-style artifacting cannot occur.
Using them today
- A SECAM machine needs a display with a Péritel/SCART input that understands SECAM composite video, since it has no RF output.
- A Péritel 400/800 still has its normal PAL RF cable, so it works on any PAL TV; the eight-colour RGB output is mainly of historical interest.
- In emulators, choose PAL timing: the SECAM machines are software-compatible with PAL apart from the FGTIA quirks above.
Credits
- comp.sys.atari.8bit FAQ (Michael Current) — 1.2/1.3 (Péritel 400/800 versions), 1.5/1.6/1.8/1.9 (SECAM 600XL/800XL/130XE/XEGS), 1.12 (FGTIA), 1.15 (Péritel and SECAM monitor port pinouts), 1.16 (SECAM ROSE engineers), 2.3 (Television sets in France, PVP80), 8.1, 11.1 timeline (French launches and prices 1982-1986) — Michael Current (comp.sys.atari.8bit FAQ), 1982
- Altirra Hardware Reference Manual — 2.8 and 6.1 (FGTIA differences) — Avery Lee (Altirra)
