Atari's Unreleased XE Peripherals (XC1411, XM128, XTM201, XTC201, XF521, XF351)

Year
1985
Type
Peripheral
Category
Announced XE-era monitors, printers and disk drives that never shipped
Manufacturer
Atari Corp.

Overview

When Jack Tramiel's Atari Corp. relaunched the 8-bit line at the Winter Consumer Electronics Show in Las Vegas (5–8 January 1985), it did so with a complete, colour-matched family: the 65XE and 130XE computers, the 65XEP portable, and a row of grey "X"-prefixed peripherals. Some reached shops — the XMM801 and XDM121 printers and the XM301 modem — but several others were shown, priced, and then quietly dropped. Prototypes of a few survive in collectors' hands; none was ever sold.

The products

Model What it was to be Announced price Fate
XC1411 (also "XC141") 14-inch colour composite monitor with built-in speaker, styled for the XE line; composite video and audio on two phono jacks; same cabinet as Atari's Goldstar-built SC1224 ST monitor "under $300" Shown January 1985 and again at the June 1987 CES; never shipped
XM128 (also "XM148") 12-inch green monochrome composite monitor with a built-in 80-column video adapter "about $150" / "under $100" Monitor dropped; the adapter became the XEP80
XTM201 Monochrome thermal printer: thermal paper or plain paper (Xerox 4024 type), ribbon-end and paper-out sensors, Epson-compatible normal-density graphics, 20 characters per second "under $100" Never shipped
XTC201 Colour version of the XTM201, also able to print plain black "under $100" Never shipped
XF521 5.25-inch, 130 KiB XE-styled drive, functionally equivalent to the 1050 and meant to replace it gradually — Dropped; Atari restarted 1050 production in Singapore instead (around October 1985)
XF351 3.5-inch single-sided double-density drive, about 320–325 KiB formatted, with a new DOS — Previewed March 1986 to January 1987; never shipped

History

The January 1985 CES announcements were part of a "Power Without the Price" campaign, with the XE peripherals given low price points to match the "under $120" 65XE. Within a year the plan had shrunk. Rather than tool up a new 5.25-inch drive, Atari simply ran another batch of 1050s. The 80-column part of the XM128 resurfaced on its own as an "80-column adapter" at the first Atari Computer Show in London in March 1986, and shipped in 1987 as the XEP80 interface module.

The 3.5-inch drive had a longer life on paper. Atari showed the XF351 at CeBIT in Hanover in March 1986 together with a new DOS then called ADOS; in its July 1986 issue Antic reported Sam Tramiel promising "500K memory 3.5-inch disk drives for the 8-bit line, with a new Disk Operating System being written by Optimized Systems Software", alongside a $79 80-column card. The XF351 was shown again at the January 1987 CES next to the new XE Game System, but what eventually shipped in 1987 was the XF551, a 5.25-inch double-sided drive — with ADOS, renamed DOS XE. The XC1411 colour monitor, meanwhile, was still being previewed at the June 1987 CES, two and a half years after its debut.

The thermal printers never resurfaced at all. Atari's shipped XE-era printers were the XMM801 dot-matrix and XDM121 daisy-wheel models.

Legacy and using them today

  • What you can buy instead. The XEP80 gives you the XM128's 80-column display (on any monochrome or composite monitor); the XF551 is the XE-era drive that shipped; any composite colour monitor stands in for the XC1411.
  • Prototypes are extremely rare; reports suggest no more than a handful of each exist.
  • DOS XE, the software that grew out of the XF351 project and shipped with the XF551, is the clearest surviving trace of Atari's 3.5-inch plans for the 8-bit line.
  • Related entries: the XL-era counterparts that also never shipped are the 815 dual drive, the 1090 expansion system and the 1400XL/1450XLD computers.

Credits