Atari SX212 Modem

Year
1987
Type
Peripheral
Category
Modem (300/1200 bit/s Hayes-compatible, SIO and RS-232)
Manufacturer
Atari Corp. (made in Taiwan)
Grey Atari SX212 modem with status lights on the front

Overview

The SX212 brought 1200-bit/s speed and the industry-standard Hayes "AT" command set to Atari owners at a bargain price. It was designed to serve both of Atari's computer lines: an RS-232 port connects it to an Atari ST, or to an 8-bit Atari through an 850 Interface Module or ICD P:R: Connection, where it behaves like any Hayes modem; and an SIO connection lets an 8-bit Atari use it with no interface at all. It shares its case with the XEP80 80-column module — which, Antic noticed, is why the silent XEP80 has speaker brackets and recesses for eight status lights. Jose Valdes was the key engineer.

Specifications

Item Detail
Speeds / standards 75–300 bit/s (Bell 103) and 1200 bit/s (Bell 212A)
Command set Hayes AT compatible (Sierra Semiconductor SC11008 controller, SC11004 modem); 40-character command buffer
Dialling Tone and pulse; auto-dial and auto-answer
Operation Full or half duplex; disconnects about 1 s after loss of carrier
Audio Built-in speaker with internal volume control
Connections SIO (single port — must be last in the chain); DB-25 RS-232 (DCE); RJ11 phone jack
SIO signalling Uses the SIO motor line to select the modem (like a cassette recorder, so it cannot share a system with one); carrier-detect and high-speed status on the proceed and interrupt lines
Power 9 V DC, 0.5 A (Atari C010472, C016353 or C018084 adapter)
Manual Atari SX212 Modem Owner's Manual C070878 / C033506 (1987)

History

Atari previewed a 1200-baud modem at the June 1986 CES for late-summer delivery, formally introduced the SX212 for the ST, XE and PC at the November 1986 Fall COMDEX, and shipped it in September 1987 at $99.95. Antic reported in May 1988 that the first shipment "swiftly sold out" over Christmas. The modem initially came with no 8-bit software; SX Express! (DX5089), Keith Ledbetter's terminal program with Paul Swanson's R: handler, a DOS 2.5 RAM-disk setup for the 130XE and an SIO cable, followed as a separate package in spring 1988.

Antic's June 1988 review by Charles Jackson called it "a safe, workable modem" that "appears almost suspiciously competent": it uploaded, downloaded and ran a BBS as well as Antic's $599 Hayes Smartmodem 1200. Unlike the 1030, its power supply gave no trouble. The reviewer's complaints were small: the speaker volume control sits deep inside and needs a long thin screwdriver, the status lights are hard to see unless you are level with them, the single SIO port rules out using it alongside a program recorder, and there was little programmer documentation.

Using it today / Known issues & tips

  • Choose your connection. Through an 850 or P:R: Connection it works with standard Hayes-aware software (Antic tested HomeTerm, BackTalk and 850 Express!). Over plain SIO you need SX212-aware software: SX Express!, patched AMODEM versions, or a T: handler — the modem has no software in ROM.
  • Escape sequence. It requires proper guard time around +++; "time-independent" escape tricks used by some modems do not work.
  • Undocumented commands. The controller also supports ATB (Bell mode), ATL (speaker loudness) and ATY (long-space disconnect), which the Atari manual omits.
  • Emulation. Altirra emulates the SX212, including its AT command set and speed switching, which is useful for testing terminal software.

Credits