Atari 8-Bit Power Supplies
- Year
- 1979
- Type
- Component
- Category
- External power supplies and transformers (1979–1987)
- Manufacturer
- Atari, Inc. / Atari Corp.
- Tags
- atari-inc, atari-corp, power-supply, ca014748, c061982, ingot, c070042, xl-series, xe-series, maintenance
Overview
No 8-bit Atari computer has a mains power supply inside the case; each relies on an external unit, and over the line's life Atari used two different approaches.
- 400, 800 and 1200XL take 9 V AC from a simple external transformer. Rectifying and regulating the voltages happens on the computer's own power board. The same transformers power the 810, 1050, 850, 822 and XF551.
- 600XL, 800XL, 65XE, 130XE, 800XE and the XE Game System take regulated +5 V DC from a "brick" plugged into a 7-pin DIN socket (pins 1, 4 and 6 are +5 V, pins 3, 5 and 7 ground, pin 2 shield). Everything inside the computer runs from that one rail, so a fault in the supply reaches the chips directly.
A third group of devices needs no supply of its own: the XC11/XC12 recorders and XM301 modem draw +5 V from SIO pin 10, the 1064 memory module is powered through the 600XL's PBI, and printers such as the 820, 825, 1025, 1029, XMM801 and XDM121 plug straight into the wall. The XEP80 and SX212 use the Atari 2600's 9 V DC centre-positive adapter (CX261 / C016353).
North American units
| Part / order no. | Output | Shipped with | Notes |
|---|---|---|---|
| C014319 / CA014748 | 9 V AC, about 1.7 A (15.3 VA) | 400, 800, early 810, 822, 850 (1979–82) | Made in Sunnyvale; a rare early version is much smaller |
| C016804 / CA017964 | 9 V AC, 31 VA | 810 with data separator (1981–82) | "Class 2 Transformer", made in Taiwan |
| C017945 / CA017964 | 9 V AC, 31 VA (3.4 A) | 400, 800, 810 Analog, 1200XL, 1050, XF551, 1020 | The common later 9 V AC unit; works with every AC-powered Atari |
| C061636 | 9.5 V AC, 40 VA | 1027 printer | |
| C061982 Type I "White Brick" | 5 V DC, 1.5 A | 600XL, 800XL (1983) | XL colours; Hong Kong; recommended |
| C061982 Type II "Ingot" | 5 V DC, 1.5 A | 600XL, 800XL (1983–84) | Taiwanese DV-512CM; not recommended |
| C061982 Type III "Black Brick" | 5 V DC, 1.5 A | 600XL, 800XL (late 1984, Atari Corp.) | Same maker as the Ingot; recommended |
| C061982 Type IV "Box" | 5 V DC, 1.5 A | 800XL (1985), 130XE | |
| C070042-011 "Mini" | 5 V DC, 1 A | earlier 65XE and XEGS | Considered less rugged |
| C070042-01 "Logo" | 5 V DC, 1 A | later 65XE and XEGS | Atari logo moulded in; made in Singapore |
UK and Europe
Early UK and French 400/800s used dual-output transformers (Ingersoll and Tadmod in Britain, Etelac in France) that also powered the 410 recorder's 6 V DC input. The XL era used the C061763 family (5 V DC; the early German-made Friwo version gives 1.8 A), and the XE era used C070046-01 (240 V UK, made in Singapore by Magpower, 5 V 1 A) and C070045-01 (220 V continental Europe, shipped with the 800XE).
History
Atari's first computers inherited the console-style approach of a plain transformer. With the XL redesign in 1983 the regulator moved out of the computer and into the brick, which tied the computer's health to the supply. Four visibly different C061982 units shipped under one part number; the Taiwanese "Ingot" type of 1983–84 (nicknamed "Ugly Klunker" by some) became infamous because it is known to fail in a way that can damage the computer it powers. Ben Poehland's articles "Atari XL/XE Power Supplies: A Hardware Mystery Solved" (Modern Electronics, May 1986) and "Secrets of XL/XE Power Supplies" (Current Notes, November 1990) documented the differences for users at the time. The XE line moved to smaller 1 A supplies.
Using it today / Known issues & tips
- Retire the Ingot. If you have a C061982 "Type II" (made in Taiwan, type DV-512CM, UL 94H6, 40 W input), do not use it; measure any vintage 5 V brick before connecting a computer. Modern regulated replacements are widely sold.
- Never mix AC and DC. The 400/800/1200XL want 9 V AC and every other model wants regulated 5 V DC; check the label before plugging anything in, especially with home-made cables or third-party supplies.
- More current is fine. A supply rated above the device's needs runs cooler; voltage must match exactly.
- 400/800 transformers are simple devices that tend either to work or not; on those machines, power faults are more often found on the computer's internal power board.
- Check the 1200XL. It uses the 9 V AC transformer, not an XL brick, despite its XL name.
- XEP80 and SX212 share the 2600 adapter (9 V DC, 500 mA, centre positive); the 1400XL and 1450XLD supplies (C062023, C062297) never shipped.
Credits
- Picture: The back of an 800XL. The round DIN socket at the far right, next to the power switch, takes the 5 V DC supply. — Evan-Amos, via Wikimedia Commons (CC BY-SA 3.0)
- comp.sys.atari.8bit FAQ (Michael Current) — 6.2 power requirements (also at mcurrent.name/powersupplies/atari8bitpower.txt); 1.15 power jack pinout — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge forum — Replacement Power Supply for 8-bit Atari (800/130XE) — AtariAge forum members
