Atari 1090 XL Expansion System (and CP/M Module)
- Year
- 1983
- Type
- Interface
- Category
- Expansion chassis for the Parallel Bus Interface — unreleased
- Manufacturer
- Atari, Inc. (prototypes)
Overview
The Parallel Bus Interface on the 600XL and 800XL was designed to give peripherals fast, direct access to the heart of the computer — and the Expansion Box, later renamed the 1090 XL Expansion System, was to be the device that delivered that promise. Plugged into the PBI, it would have provided a powered chassis with plug-in card slots, so that disk controllers, extra memory, 80-column video, modems and other cards could share the computer's bus at full speed. Atari first showed it at the June 1983 Consumer Electronics Show alongside two other expansion products, the CP/M Module and the 64K memory module that shipped as the 1064. Neither the 1090 nor the CP/M Module ever shipped.
The 1983 Expansion Box specification
Atari's internal specification of 27 July 1983 describes the original design in detail:
| Item | Specification (1983) |
|---|---|
| Connection | To the PBI through a "Buffer Box" that buffers the bus signals |
| Slots | Eight slots for 9 × 5-inch option cards, 50-pin card edges |
| Built-in I/O | Two RS-232C serial channels (two 68B50 ACIAs and a BR1943 baud-rate generator, 50–19,200 baud) and a Centronics-style parallel output (68B21 PIA), all responding as parallel device #6 |
| Power supply | 0.75 A at +5 V, 0.1 A at +12 V and −12 V per slot; 6.75 A total at +5 V |
| Styling | To match the XL line, fit within one square foot and support a 13-inch colour TV on top |
| Planned cards | Disk controller, Votrax speech, 300/1200 baud modem, EPROM programmer, IEEE-488, real-time clock, 80-column display, printer buffer, Apple card, VCS adapter, A/D converter, hard-disk interface, music card, speech recognition, RAM disk, Corvus and Ethernet interfaces, among others |
The same documents assign memory-mapped ranges for cards — including registers for an 80-column video card, a RAM bank-select register and a device select/interrupt register at $D1FF — and note that a 64K RAM card could run in a "1064 mode" that lets RAM replace the OS ROM.
History
Atari promised the Expansion Box for the end of 1983, but it slipped. At the June 1984 CES the company privately showed a revised 1090 XL Expansion System: five slots for XL Expansion Cards (9 × 5 inches, 50-pin edge), shipping with one 1090/1 XL 64K RAM Card that would take a 600XL to 80 KiB, or a 600XL with 1064, an 800XL or the planned 1450XLD to 128 KiB; with two RAM cards a machine could reach 192 KiB. Only a handful of prototypes were made. Schematics and firmware for one card, the 80 Column Video Card (a 68B45 CRTC design with 2 KiB of video RAM and the standard Atari character sets), were later released by the Atari Historical Society.
The CP/M Module (internally "Sweet Pea", or 1060) was to be a separate box styled like the 1050 drive, with a 4 MHz Z-80A, 64 KiB of RAM, CP/M 2.2 on Atari-format disks and its own 80-column monochrome output, using a design licensed from Add-on Computer Corp. Add-on Software planned to sell WordStar, dBASE II, SuperCalc, Multiplan, MBASIC and other CP/M titles for it. Atari confirmed its cancellation in January 1984.
Using it today
- Reproduction. A modernised reproduction of the 1090XL, with expansion cards, has been sold by 5cfab.
- Emulation. Altirra emulates the 1090 80 Column Video Card.
- Real alternatives for PBI expansion came from third parties — for example ICD's Multi I/O and CSS's Black Box.
Credits
- Picture: A prototype Atari 1090 XL Expansion System — Gury's Atari 8-bit Forever portal (gury.atari8.info) (Unknown, used for identification)
- comp.sys.atari.8bit FAQ (Michael Current) — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra Hardware Reference Manual (Avery Lee) — Avery Lee (Altirra)
- Altirra emulator home page and change log — Screenshot from Avery Lee's Altirra page, virtualdub.org
