- Year
- 1979
Overview
The fourth chip on the Atari's I/O block is not an Atari design at all. The PIA is a MOS Technology MCS6520A — a pin-for-pin, e
Overview
Two hand-built modifications in the Nir Dary CD collection replace or extend the ROMs inside an 800XL or XE. Neither came with much
- Year
- 1986
Overview
The MicroPort XL is a kit, not a finished gadget. Supra Corporation, the Oregon company that grew out of Microbits Peripheral Produ
- Year
- 1979
Overview
Every Atari 8-bit computer from the 400 to the XE Game System talks to its disk drives, cassette recorders, printers, modems and th
- Year
- 1984
Overview
In Antic's January 1984 issue (Vol. 2 No. 10), Evan Rosen, co-author of Valpar's Val-FORTH, followed his "Anatomy of a
- Year
- 1983
Overview
The four controller jacks on an Atari 400/800 are far more than joystick sockets. They provide 16 programmable digital I/O lines (t
- Year
- 1995
Overview
Atari 800 owners who added both an XL/XE-compatible memory expansion and a switchable XL OS hit an awkward conflict. On the 800, th
- Year
- 1985
Overview
Being able to burn your own EPROMs means custom OS ROMs, homemade cartridges, BASIC replacements and drive-ROM upgrades. In the 198
- Year
- 1979
Overview
The controller ports are the most versatile connectors on an 8-bit Atari. Each is a male DE-9 plug wired to three different chips:
- Year
- 1986
Overview
In late 1986 Nick Kennedy, who later created SIO2PC, had two Atari 800s, only one of which had a disk drive. He wrote a set of asse
- Year
- 1978
Overview
Because the 8-bit Ataris use the same controller ports as the Atari 2600 VCS, the VCS's more unusual controllers work on them t
