MyDOS
- Year
- 1983
- Publisher
- Wordmark Systems (sold by SWP and Newell Industries)
- Type
- DOS
- Category
- Disk operating system (menu-driven, DOS 2-compatible)
- Developer
- Charles W. Marslett; later versions with Bob Puff, David R. Eichel
- Language
- 6502 machine language
- Requirements
- Any Atari 400/800/XL/XE with at least one DOS 2-compatible drive
- Tags
- dos, wordmark, marslett, menu, subdirectories, ramdisk, hard-disk, double-density, freeware, atr8000
Overview
MyDOS looks almost exactly like Atari DOS 2, which was the point. It keeps the lettered menu, the DOS.SYS/DUP.SYS split, MEM.SAV and DOS 2-compatible files, then extends them: automatic density detection, true double density, double-sided and 8-inch drives, subdirectories, RAM disks of up to 1MB and hard disks of up to 16MB. Because it stayed so close to DOS 2, it ran nearly all existing software, and that made it a favourite for owners of bigger or faster drives.
Antic's 1985 round-up called it "one of the easiest to learn and one of the most potentially useful DOS's available" and said it combined the best of Atari DOS 2 and SpartaDOS. MyDOS went freeware with source code at the end of 1988, which is a big reason it is still around.
The menu
MyDOS keeps DOS 2's letters A to N and adds more:
A. Disk Directory J. Duplicate Disk
B. Run Cartridge K. Save Memory
C. Copy File(s) L. Load Memory
D. Delete File(s) M. Run at Address
E. Rename File(s) N. Load MEM.SAV
F. Lock File(s) O. Change Config.
G. Unlock File(s) P. Set Density
H. Write DOS Files Q. Make Directory
I. Initialize Disk R. Pick Directory
A status line above the menu shows which drives are present and what MyDOS thinks each one is (single or double density, RAM disk or hard disk), and the current default directory. Unlike DOS 2, the menu scrolls off as you work; press RETURN to bring it back. BREAK aborts any command.
Useful details from the 4.50 manual:
- A shows sizes as four-digit numbers (DOS 2 uses three), marks locked files with
*and subdirectories with:. Typing2,D1:DIR.TXTsaves drive 2's directory to a text file, and1,P:prints it. - C copies sets of files.
D1:TE*.*,3copies every file starting with TE to drive 3./Qasks before each file,/Sskips.S??files (handy to leave DOS files behind),/Aappends and/Xforces swap prompts. - D asks before each delete;
/Ndeletes quietly. - I formats;
/Njust rewrites an empty directory on an already-formatted disk, which is fast. On a 1050 you can answer A to format in MyDOS's own enhanced-density layout. - O sets the number of file buffers, write-verify, the RAM disk (130XE-style or Axlon, its size, control port and drive number), and for each drive whether it is configurable (Percom-style), a hard disk (256–65,535 sectors), single- or double-sided, and 35, 40, 77 or 80 tracks.
- P forces a drive's density, e.g.
2,D. This is needed for drives that cannot report density, such as the Indus GT. - Q and R create and select subdirectories.
Subdirectories and files
Each directory, including the root, holds 64 entries, but any entry can be a subdirectory, so a disk can hold hundreds of files. Paths use : or > as separators, for example D1:TEST>BASIC>GAME.BAS. Filenames may include lower case, the underscore and @.
On standard drives MyDOS reads and writes DOS 2.0S single-density disks interchangeably. It can use sector 720, which DOS 2 ignores. It reads DOS 2.5 enhanced-density disks but writes only to their first 720 sectors; its own enhanced format is not readable by DOS 2.5. SpartaDOS and OS/A+ 4 disks must be converted first.
Each open file needs a 256-byte buffer, and the memory MyDOS uses does not depend on how many drives you have. With the default three buffers, programs can load as low as $1F00. A few programs fail under MyDOS because they jump directly into DOS 2's internal code or rely on three-digit sector counts in directory listings.
Behind the scenes
Charles Marslett wrote MyDOS for Wordmark Systems as a side project while developing firmware for Percom's Atari drives. It was the first Atari DOS to change density on the fly and the first to support high-capacity disks with a single drive. The first release was numbered 3.0 to present it as the next step after Atari DOS 2.0.
Version 3.x was sold by SWP with its ATR8000 interface; the 3.1x builds included an R: handler for the ATR8000's serial port. There were also ROM versions, RDOS, that ran from an EPROM on Newell's Ramrod board or a CDY Omnimon board. MyDOS 4.x (1985–86) added 1050 support, hard disks and RAM disks, and shipped with the SupraDrive and BTL hard disks, the TOMS 720 drive and Newell's 256KXL upgrade. Newell Industries sold it for $39.95 in 1985.
Bob Puff of Computer Software Services released 4.50 as freeware in November 1988, adding drivers for the 850 and the ATR8000. Marslett made the 4.51 source available. David R. Eichel's 4.53 (1 January 1990) added multiple autorun files (*.AR0–*.AR9, replacing AUTORUN.SYS) and fixed Axlon RAM disk support. Lee Barnes produced a 4.55 beta in 2003.
Using it today
MyDOS 4.5x is a strong choice for large disk images, hard-disk images and SD-card or SIO-emulation setups. It gives DOS 2 compatibility with directories, so menus of games and utilities can be organised into folders without leaving the familiar screen. Configure the RAM disk once with O, then use H to write DOS to your boot disk so the settings stick. If you move files between MyDOS and DOS 2.5 enhanced-density disks, remember the one-way compatibility described above, and use single or double density for disks you want to share.
Credits
- Picture: The MyDOS 3.011 menu: Atari DOS 2's layout plus configuration, density and subdirectory commands. — Screenshot from AtariMania (Fair use (packaging/screenshot for identification))
- comp.sys.atari.8bit FAQ (Michael Current) — 7.3.3 (MYDOS) — Michael Current (comp.sys.atari.8bit FAQ)
- MYDOS Version 4 User Guide, Revision 4.50 (Charles Marslett & Robert Puff, 1988) — 1988
- Antic Vol. 4 No. 3 (July 1985) — Everything You Wanted to Know About Every D.O.S., Eric Clausen — AtariMagazines.com (Kevin Savetz), 1985
- Antic Vol. 8 No. 2 — I/O Board (MyDOS went public domain December 1988) — AtariMagazines.com (Kevin Savetz), 1988
- AtariMania — MyDOS 3.011 — Screenshot from AtariMania (Fair use (packaging/screenshot for identification))
