Atari DOS I
- Year
- 1979
- Publisher
- Atari, Inc.
- Type
- DOS
- Category
- Disk operating system (Atari's first, menu-driven)
- Developer
- Shepardson Microsystems, Inc. (File Manager by Paul Laughton)
- Language
- 6502 machine language
- Requirements
- Atari 400/800 with an Atari 810 disk drive (or compatible)
- Tags
- dos, atari-inc, 810, menu, 1979, shepardson, paul-laughton, dos-1, history
Overview
DOS I (often written DOS 1.0) was the disk operating system Atari shipped with the first 810 disk drives. Its title line reads DISK OPERATING SYSTEM 9/24/79. It came on the boxed 810 Master Diskette, CX8101, and was supplied with drives made through 1980. Its reference manual (C015200) was packed with 810s from the fall of 1980.
Like Atari BASIC, DOS I was written under contract by Shepardson Microsystems. Its File Management System (FMS) was the work of Paul Laughton, who had earlier written Apple DOS for Shepardson. It was soon replaced by DOS 2.0S, which reused Laughton's FMS but fixed DOS I's main shortcomings. DOS I is now mostly a historical curiosity, but it set the look of every Atari DOS menu that followed.
How it worked
The whole of DOS I is a single file, DOS.SYS, which holds both the File Management System and the Disk Utility Package (DUP, the menu). At power-up the OS boots DOS.SYS into memory and hands control to the cartridge if one is inserted, or straight to the DOS menu if not. Typing DOS in BASIC brings up the menu. Because the menu code is always in memory, nothing has to be reloaded and no MEM.SAV file is needed. The cost is that the menu permanently takes RAM that a program could otherwise use. DOS 2.0S split the two parts into DOS.SYS and DUP.SYS for exactly this reason.
The menu has fifteen items:
A. DISK DIRECTORY I. FORMAT DISK
B. RUN CARTRIDGE J. DUPLICATE DISK
C. COPY FILE K. BINARY SAVE
D. DELETE FILE(S) L. BINARY LOAD
E. RENAME FILE M. RUN AT ADDRESS
F. LOCK FILE N. DEFINE DEVICE
G. UNLOCK FILE O. DUPLICATE FILE
H. WRITE DOS FILE
Each command shows a prompt, does its work and then asks you to TYPE RETURN FOR MENU before you can choose the next one. Wildcards (* and ?) work in file names. O copies a file between disks on a single drive. N, Define Device, was only partly implemented, and the manual itself warns you to use it with caution.
Disk format and limits
DOS I formats an 810 disk as 720 sectors of 128 bytes, the same physical layout later used by DOS 2.0S. Three bytes of each sector link it to the next, leaving 125 bytes of data. Sector 1 is the boot sector, sector 360 is the Volume Table of Contents and sectors 361–368 hold the directory, so a disk has room for 64 files and 709 free sectors (about 88K) when empty. Like DOS 2, it never uses sector 720.
DOS I has a number of limits that DOS 2.0S removed:
- Its binary file format is unique. Every later Atari DOS uses the DOS 2.0S binary format instead, so DOS I binary files need converting.
- DOS 2 disks need a three-sector boot, which DOS I cannot read.
- BASIC's
NOTEandPOINTstatements are not supported. - It is not compatible with the R: handler in the 850 Interface Module. To use the 850's serial ports, Atari advised moving to DOS 2.
- It copies through a small buffer, so copying is slow, and it can write DOS files only to drive 1.
- Instead of DOS 2's
AUTORUN.SYS, it uses anAUTO.SYSfile that can poke values into memory at startup.
Two settings could be changed with POKEs before using H to write a new DOS.SYS: location 1802 (DRVBYT) sets how many drives DOS reserves buffers for (POKE 1802,1 for one drive saves 397 bytes), and location 1801 (SABYTE) sets how many files can be open at once, from 1 to 3. DOS 2.0S kept both locations, which is why this tip still appears in later manuals.
Behind the scenes
DOS 2 took a while to arrive. In August 1982 Creative Computing recalled that while Atari worked on the bugs it "released" several preliminary versions, called DOS 2.4, 2.5, 2.8 and 2.S. The finished DOS 2.0S carries a 1980 copyright; its menu program is dated 18 November 1980. It was sold as the CX8104 Master Diskette II and shipped with 810 and 1050 drives from 1981, and it became the standard that almost every later Atari DOS copied.
Using it today
DOS I images are easy to find and boot normally in Altirra or atari800 with a standard 810 drive. It is interesting to see Atari's first menu, but it is not practical to use: DOS 2-format disks and binary files will not work with it. For everyday work use DOS 2.0S, DOS 2.5 or one of their compatible successors.
Credits
- Picture: The DOS I menu. Items A to H match later Atari DOS versions; the right-hand column was rearranged in DOS 2. — Screenshot of Atari DOS I from AtariMania (Screenshot — used for identification/commentary)
- comp.sys.atari.8bit FAQ (Michael Current) — 7.3.1 (DOS I, DOS 2.0S) — Michael Current (comp.sys.atari.8bit FAQ)
- Atari Disk Operating System Reference Manual (DOS I), Internet Archive item ataridos1manual (OCR text) — Internet Archive
- AtariMania — DOS 1.0 — Screenshot of Atari DOS I from AtariMania (Screenshot — used for identification/commentary)
