Votrax Type 'n Talk
- Type
- Peripheral
- Category
- Text-to-speech synthesizer (RS-232, via Atari 850)
- Manufacturer
- Votrax
Overview
The Type 'n Talk (TNT) is an external text-to-speech box. Send it ordinary English text over a serial line and it speaks the words, using Votrax's SC-01-A speech chip. It isn't Atari-specific, but with the Atari 850 Interface Module it worked with the standard R: handler. A BASIC program could make the computer talk with a few lines of code. The Best of Antic's article "'tari Talkers" compared it with Street Electronics' Echo GP and noted that both "speak an unlimited vocabulary (anything you can print), take almost no memory, and cost less than $500".
Specifications
| Item | Value |
|---|---|
| Speech chip | Votrax SC-01-A |
| Interface | RS-232 serial (Atari 850 port 1 or 2, with a suitable cable) |
| Rate used with Atari | 300 baud |
| Audio | Mini-phone jack for an external 8-ohm speaker (not included) |
| Control | Plain text through the 850's R: handler |
| Cable | From Votrax (about $30) or home-made (DB-9 to DB-25, 6-conductor) |
How to use it
Set the TNT's switch to 300 baud, cable it to serial port 1 or 2 of the 850, boot DOS with the 850 handler, and open the port in BASIC. The Best of Antic gave the recipe:
OPEN #1,8,0,"R1:"
XIO 34,#1,48,0,"R1:"
XIO 36,#1,12,0,"R1:"
PRINT #1;"HELLO MARY"
The two XIO calls configure the port. After that, every PRINT #1 is spoken. The article noted that a program to read a string from the keyboard and speak it "takes no more than three lines". The speech has a distinct "computer voice". It takes some concentration at first, but quickly becomes natural, "a bit like getting used to that uncle with the funny accent".
Uses
The article stressed uses beyond games: talking dictionaries and spelling drills, speaking for a speech-impaired person, or reading back every keystroke to a blind user. The author's own favourite was a program that showed a four-colour chart and explained it out loud. Adventure International's graphic adventures, such as Adventureland, had optional speech output for the Type 'n Talk.
Using one today
Any working 850-compatible RS-232 port will drive a Type 'n Talk, including ICD's P:R: Connection or an MIO. You need an 8-ohm speaker on the output jack.
Credits
- Picture: The Type 'N Talk, from Votrax's product data sheet. — Photo from the Votrax Type-'N-Talk data sheet in the Internet Archive item 'votrax-speech-press-kit' (Fair use (manufacturer data sheet))
- Best of Antic Volume 1: 'tari Talkers (voice synthesizers for the Atari) — AtariMagazines.com (Kevin Savetz)
- comp.sys.atari.8bit FAQ (Michael Current), section 6.9 (Type 'n Talk by Votrax) — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 2 No. 4 (July 1983), Product Reviews: Adventureland (Votrax Type 'n Talk support) — AtariMagazines.com (Kevin Savetz), 1983
