SIDE3 Cartridge

Year
2020
Type
Modern device
Category
SD-card cartridge: mass storage, cartridge emulation, RTC, DMA
Manufacturer
Sebastian Bartkowicz (Candle'O'Sin), firmware by Jonathan Halliday; sold by Lotharek, RetroLemon and others
SIDE3 cartridge label crediting Candle (hardware), FJC (software) and lotharek.pl

Overview

SIDE3, released from 2020, is Candle'O'Sin's rebuild of the SIDE idea for the SD-card era. The hardware has a full-size SD slot, 8 MB of flash, 2 MB of fast RAM used for cartridge emulation and buffering, a DMA engine, a battery-backed real-time clock with NVRAM, and two activity LEDs. Jonathan Halliday's (flashjazzcat's) SIDE3 Loader firmware turns it into an all-in-one launcher. From one menu you can mount ATR disk images, run executables, load cartridge images of many types up to 1 MB, and attach hard-disk partitions. A switch selects SpartaDOS X mode or Loader mode, and a menu button (which doubles as an ATR-swap button with an Ultimate 1MB) brings up the browser.

Specifications

Item Value
Storage Full-size SD slot (SPI mode), FAT16/FAT32
Flash 8 MB (initial runs: Macronix MX29LV640ET)
RAM 2 MB, mappable to the cartridge windows
Cartridge emulation Wide range of cartridge types, up to 1 MB
DMA SD-to-memory reads at 1 cycle/byte; memory copies at 2 cycles/byte, up to 64 KB, with address stepping and AND/XOR masks
Clock Real-time clock with battery-backed NVRAM
Controls SDX/Loader switch; menu button
LEDs Software-controlled green LED, red SD-activity LED

SIDE3 Loader features

  • Holds up to 1,024 FAT filenames in memory, so there's no paging through long folders, and has a recursive background search.
  • Mounts cartridges, ATRs and partitions at the same time.
  • A RAM-based OS lets some ATRs boot even without an Ultimate 1MB. With a U1MB it integrates through special SIDE3 plugins.
  • Handles up to fourteen FAT partitions, with an APT browser for hard-disk partitions and MAP files for multi-disk volumes.
  • A built-in mini-DOS gives read-only access to FAT volumes as D1:.
  • Plays audio files in "Pulse Density Modulation" (FujiConvert) format, and has built-in Covox support.
  • A SpartaDOS X driver is available for SIDE3 hard-disk access.

How it works

The SD card is driven over SPI. The host software implements the SD protocol, and the cartridge helps with a shift register, CRC calculation and DMA. Reads from SD can stream straight into memory under DMA, interleaved with normal CPU access, which is why loading is fast. There's no DMA for writes to the card. The DMA engine also speeds up memory copies, but it isn't a full blitter: it can't copy from flash or combine two sources.

Using it today

  • Format the card FAT32, copy your ATR, XEX and CAR files into folders, and boot in Loader mode.
  • Firmware updates are published by Jonathan Halliday.
  • Altirra emulates SIDE3 (fixes for switching from a controlled cartridge port appear in its notes), so you can prepare a card image on a PC first.

Credits