SIC! (Super Inexpensive Cartridge)

Year
2011
Type
Modern device
Category
Flash cartridge, multicart and programmer
Manufacturer
The SIC! team: Stryker, Candle'O'Sin, Pr0be, drac030 (KMK), Trub, Ooz, Dely and others (Poland)
Green SIC! rev 1.2 cartridge circuit board with a large DIP flash chip, logic chips, a red push button and two slide switches

Overview

SIC!, short for Super Inexpensive Cart, is a flash-memory cartridge designed in Poland for the Atari 8-bit. It was built to be cheap and flexible, a scene project rather than a commercial product. A single board takes a standard 5 V DIP flash chip of 1, 2 or 4 Mbit (128, 256 or 512 KB), and the later SIC!+ has sockets for two 4 Mbit PLCC chips (1 MB). Because the cartridge can write to its own flash, it serves three purposes:

  • a multicart holding many games, demos and utilities behind a menu;
  • a carrier for SpartaDOS X, the cartridge-based DOS, with official SDX builds for the 256K and 512K SIC! and the 1 MB SIC!+;
  • a cheap flash programmer, for example to program TOS chips for the Atari ST/E.

Specifications

Item Value
Design Stryker (idea, testing); Candle'O'Sin (hardware, SIC! Cartridge Generator); Pr0be (menu, loader); drac030/KMK (Flasher, Dump, SDX upgrade); Trub (SDX upgrade, menu fixes); Ooz (graphics); Dely (label, website); others
Year About 2011 (AtariAge pre-order thread)
Flash 1, 2 or 4 Mbit 5 V DIP (e.g. Winbond 29C020, AMD 29F040); SIC!+: two 4 Mbit PLCC chips (1 MB)
Banking 16 KB banks; register at $D500-$D51F
Windows $8000-$9FFF (lower 8 KB of the bank) and $A000-$BFFF (upper 8 KB), switchable independently
Controls Enable/disable switch (forces off the $A000 window); push button and slide switches on the board
Software SIC! Menu and loader, SIC! Flasher, SIC! Dump, SIC! Cartridge Generator (PC), SDX Upgrade

How it works

The banking register lives in the cartridge-control area at $D500-$D51F. A single byte written there sets everything:

Bits Function
0-4 Select one of up to 32 × 16 KB banks
5 1 = enable the $8000-$9FFF window
6 0 = enable the $A000-$BFFF window
7 1 = enable flash writes

Both windows show halves of the same 16 KB bank: $8000 shows the lower 8 KB, $A000 the upper. At power-up the register is $00, which selects bank 0 with only the $A000 window on, so the cartridge boots like a normal 8 KB cart from the start of its flash. Setting bit 7 lets software write to the flash chip. That's how the Atari-side SIC! Flasher reprograms the cartridge, and how SDX's upgrade tools update their own cartridge. The enable/disable switch forces the $A000 window off, so you can boot the computer as if no cartridge were present.

Using it today

  • As a multicart. Build an image on the PC with the SIC! Cartridge Generator, then write it with the SIC! Flasher from DOS.
  • SpartaDOS X. Download the SIC! or SIC!+ build matching your flash size. SDX 4.40 and later need at least 128 KB of cartridge space.
  • Build your own. PCB files are published (versions 1.0 and 1.2, and SIC!+ shared on PCBWay), and the project site has the software. The zip archives' password is given on the site.
  • Emulation. Altirra supports 128K, 256K and 512K SIC! images, keeps their original type, and can emulate either Am29F040B or SST39SF040 flash chips. That helps when testing flasher software.

Compatibility

Designed for the cartridge slot of XL/XE computers. Cartridge images made for other bank-switching schemes, such as Atarimax or XEGS carts, can't simply be copied onto a SIC! as they are.

Credits