Atarimax MaxFlash Cartridges
- Type
- Modern device
- Category
- Reprogrammable flash cartridges (1 Mbit and 8 Mbit)
- Manufacturer
- Atarimax (Steven J. Tucker)
Overview
Atarimax, the company of Steven J. Tucker (also author of the APE SIO emulator), makes the MaxFlash family of reprogrammable cartridges. They hold far more than a standard 8K or 16K ROM cartridge, switching it into the computer's 8 KB cartridge window one bank at a time, and they can be re-flashed from the Atari itself. That combination made MaxFlash a common format for big modern releases, multi-game collections and cartridge-based software such as SpartaDOS X builds and Altirra Extended BASIC. Emulators support the MaxFlash banking schemes as standard cartridge types.
Models
| Model | Capacity | Banking | Notes |
|---|---|---|---|
| MaxFlash 1 Mbit | 128 KB (16 × 8 KB) | Read or write $D500-$D51F: address bits 0-3 select the bank, bit 4 disables the cartridge |
Flash chips seen: AMD Am29F010, Micron M29F010B, SST39SF010 |
| MaxFlash 8 Mbit | 1 MB (128 × 8 KB) | Read or write $D500-$D5FF: bits 0-6 select the bank, bit 7 disables |
Two 4 Mbit chips (Am29F040B, BM29F040 or SST39SF040) |
| MaxFlash 1 Mbit + MyIDE (2006) | 128 KB + CompactFlash | Banking moved to $D520-$D53F; CF registers at $D500-$D507 |
Combined MyIDE interface and flash cartridge, portable between machines |
| MyIDE-II (2012) | 512 KB flash + 512 KB SRAM | CompactFlash with hot swap, FAT32 loader, MyBIOS; programmed with Maxflash Studio |
All are mapped through $A000-$BFFF. Written data on the bank-select accesses is ignored. The address alone selects the bank.
How it works
Bank switching uses the cartridge-control area at $D5xx. Touching a particular address picks the bank, so a program can switch banks with a single LDA or STA. A "disable" bit hides the cartridge entirely, which allows RAM-hungry code or a DOS to reclaim $A000-$BFFF temporarily. The flash chips can be erased and programmed in place using the standard flash unlock sequences, so update tools run on the Atari itself. Atarimax's Maxflash Studio software and USB programmer build cartridge images and custom menus on a PC.
Known issues
Some versions of SpartaDOS X touch the $D500-$D51F range, which is the MaxFlash 1 Mbit banking register. Programs running from such a cartridge can then have their bank reset during disk I/O. Altirra Extended BASIC's author described this crash with SDX and was working on a workaround.
Using one today
- Many homebrew games and tools are distributed as MaxFlash images (
.CARor.BIN). Flash them with Atarimax's tools, or load them on a multi-format cartridge emulator such as the SIDE3 or AVGCart, which support a wide range of cartridge types. - Altirra lists both MaxFlash sizes as cartridge types, and recent versions let you choose the 1 Mbit flash chip type, including the newer SST39SF010-based cartridges.
- Atarimax has also sold the APE Warp+ OS 32-in-1 module, an internal OS-selection board.
Credits
- Picture: Atarimax MaxFlash cartridges. — Product photo from Atarimax (maker) (© Atarimax, used for identification)
- Altirra Hardware Reference Manual, sections 8.2 Atarimax flash cartridges and 8.3 Atarimax MyIDE-II — Avery Lee (Altirra)
- comp.sys.atari.8bit FAQ (Michael Current), sections 3.3.4 (MyIDE+Flash, MyIDE-II), 3.4.1 (APE), 7.1.2 (APE Warp+ OS 32-in-1) — Michael Current (comp.sys.atari.8bit FAQ)
- AtariAge forum thread: Altirra Extended BASIC (MaxFlash 1Mbit cartridge; SDX banking issue) — AtariAge forum members
- Altirra emulator release notes (MaxFlash 1Mbit flash type selection) — Screenshot from Avery Lee's Altirra page, virtualdub.org
