Joytricks: Lefty Joystick, Pushbutton Controller and Second Fire Button
- Year
- 1983
- Type
- DIY project
- Category
- Controller modifications
- Manufacturer
- Homebrew (John Anderson, Creative Computing; pushbutton idea credited to Rick Rowland)
Overview
"Joytricks" is a short hardware article by John Anderson, an associate editor of Creative Computing, collected in The Creative Atari (Creative Computing, 1983). It offers three easy controller projects that need only a screwdriver, a soldering iron and parts from Radio Shack. They work because the Atari joystick is just five switches to a common wire, so its directions and trigger can be rearranged or duplicated at will.
The wiring you need
Anderson's Figure 4 gives the standard Atari joystick cable colour code, still useful for any repair:
| DE-9 pin | Function | Wire colour |
|---|---|---|
| 1 | Up | White |
| 2 | Down | Blue |
| 3 | Left | Green |
| 4 | Right | Brown |
| 6 | Trigger | Orange |
| 8 | Common (ground) | Black |
He notes that you are looking at the socket on the computer: the plug wires up "mirror-image". Each switch simply connects its line to the common wire. For the electrical details see controller port pinouts.
1. A lefty joystick
The standard CX40 has its fire button at top left, which suits right-handed players. To move the button's "reference" to the top right, open the stick, keeping track of the screws and the little spring under the trigger. Then move the direction leads to new terminals on the circuit board, as in his Figure 1, so the directions match the stick's new orientation. Pull the connectors by their collars, not their wires. Anderson's figures show the original and the new wiring for both board styles: older sticks have three connectors on each side of the board, newer ones have them all on one side. Then label the stick clearly, so a right-handed player doesn't get a nasty surprise.
2. A pushbutton controller for under $8
Following an idea from Rick Rowland, Anderson turned an old joystick cord into a button panel for games such as Asteroids that use buttons in the arcade:
- Parts: three packs of momentary pushbuttons (Radio Shack 275-609, two per pack), a project case (270-222), short wires, and the cord from a retired joystick. You could also wire a new DE-9 plug.
- Making holes: without a suitable drill, start each hole with the soldering iron and ream it out slowly with a scissor blade, checking the size often. Make a groove for the cord the same way, just wide enough to hold its collar.
- Layouts: "Arcade" style (L, R, D and T in a row, U above, the classic Asteroids arrangement, with D as hyperspace and U as thrust) or "Clock-Directional" (U, L, R and D like a compass). Anderson preferred the clock layout for most games.
- Wiring: each button goes between its colour-coded wire and the black common. Crimp the push-on connectors gently so they hold but can still be removed.
Diagonals are hard, since they need two buttons at once, so one-dimensional games suit it best. He also suggests trying it on a maze game such as Jawbreaker if you're feeling brave.
3. A second fire button
The spare sixth button can go on top of the joystick handle, so you can fire with the steering hand. Pierce a hole in the top of the stick, cut about half an inch off the top of the white plastic stem inside, run two braided 12-inch leads down through the stem, and screw the button into the handle. Its leads go in parallel with the existing trigger, so both buttons work. Some games limit how fast you can fire, so it won't always help.
Ready-made alternatives (1983)
The same article reviewed three commercial pushbutton controllers: the Starplex (Asteroids layout, very fast buttons, an optional battery-powered rapid-fire mode, $29.95), KY Enterprises' large, sturdy directional-layout controller in left- and right-handed models ($26.95; the firm also made controllers for the handicapped), and the untested Accu-Play Control Board ($29.95).
Tips today
- Joystick switches and wires are easy to replace, but original CX40 boards are worth preserving. Buy a cheap cord or stick for experiments.
- Any homemade controller can be tested in an emulator's input view or with a short BASIC loop that prints
STICK(0)andSTRIG(0).
Credits
- Picture: Anderson's two button layouts: 'Arcade' (Asteroids-style) and 'Clock-Directional'. — Figure 2 of John Anderson's 'Joytricks', The Creative Atari (Creative Computing Press, 1983), from a scan of the book
- John Anderson — Joytricks, in The Creative Atari (atariarchives.org) — Figure 2 of John Anderson's 'Joytricks', The Creative Atari (Creative Computing Press, 1983), from a scan of the book
- atari8bit.net book database — The Creative Atari (Creative Computing, 1983) — Atari8bit.net, 1983
