FREDDIE memory controller

Year
1984
Type
Component
Category
Custom chip — DRAM control
Manufacturer
Atari, Inc.
NCR-made FREDDIE chip marked C061991-29, Atari 1983

Overview

FREDDIE is the least famous of the 8-bit Atari's custom chips because it does nothing a programmer can see. It is a memory control unit: a custom LSI chip that takes the 6502/ANTIC bus's 16-bit addresses, splits them into the 8-bit row and 8-bit column addresses that dynamic RAM chips expect, and generates the row- and column-address strobe timing. In earlier machines — the 400/800, 1200XL, 600XL and the first 800XL boards — those jobs were done by a handful of small and medium-scale TTL chips plus a custom delay line. Atari's design specification (document C061922) calls the part the "Freddie RAM" memory control unit.

The chip appears in the later PAL 800XL boards marked 800XLF, in the SECAM 800XL, and in every XE machine (65XE, 130XE, 800XE and XE Game System). Atari's technical documents spell it FREDDIE; the XE owner's manuals call it FREDDY. Richard C. Pasco is credited with its logic design.

Specifications

Item Detail
Function DRAM address multiplexing (16-bit bus address → 8-bit row + 8-bit column) and RAS/CAS timing generation
Part numbers C061922 and C061991 (both carry a 1983 copyright date)
Found in 800XL "800XLF" boards (from the September 1984 revision) and SECAM 800XL; all 65XE, 130XE, 800XE, XEGS
Replaces Several SSI/MSI TTL parts and a custom delay line
Reset On XL/XE machines the RESET key pulls the reset lines of the 6502, ANTIC, FREDDIE and PIA (Altirra)

History

An early Atari 600 product specification called the chip "FRED" and gave it a second purpose: making possible a low-cost external Atari 5200 adaptor for the new computers. That adaptor never appeared, but FREDDIE itself became a key cost-reduction step. An internal Atari memo of 9 September 1984 laid out three successive cost-reduced XL models: the 800XLF incorporating FREDDIE (SECAM version due October 1984, NTSC/PAL in November), a "900XLF" with a new keyboard and case (which became the 65XE), and a "900XLKF" in which a chip code-named KERI would combine the functions of ANTIC, GTIA and POKEY — the last never appeared.

The difference between the two part numbers is not well documented. One theory is that the original C061922 was designed around the older ANTIC chips' refresh counter (128 row addresses), while C061991 also handles the 256-row refresh generated by the newer ANTIC "E" and "B" versions.

Using it today / Known issues & tips

  • Memory upgrades care about FREDDIE. Because it changes the DRAM timing, some RAM expansions behave differently on FREDDIE and non-FREDDIE boards. For example, Erhard Puetz published a fix for refresh errors when the Megaram XL/XE expansion is installed in XL machines without FREDDIE.
  • Identifying an 800XLF. Late PAL 800XL motherboards are marked "800XLF" and also carry chroma on monitor-port pin 5, unlike earlier 800XL boards.
  • No software impact. FREDDIE is transparent to programs; machines with and without it run the same software.
  • Spares. FREDDIE is an Atari-specific part, so a replacement has to come from another FREDDIE-equipped board.

Credits