Atarimax/ABBUC USB Cartridge

Year
2006
Type
Modern device
Category
USB host adapter (cartridge)
Manufacturer
Designed by ABBUC e.V. (Carsten Strotmann, Harry Reminder, Thomas Grasel); produced by Atarimax (Steven J. Tucker)
Black cartridge with a USB Cartridge label reading Designed by ABBUC, Produced by Atarimax

Overview

The USB Cartridge gives an Atari 8-bit computer a USB host port, so it can use the cheap PC keyboards, gamepads and steering wheels of the 2000s. It came out of a German ABBUC project that began in summer 2002. The hardware and software were designed for ABBUC by Carsten Strotmann, Harry Reminder and Thomas Grasel, with Marc Brings, Florian Dingler and Guus Assmann also in the team. Atarimax (Steven J. Tucker) designed the production PCB and manufactured the cartridge from 2006. Its chipset talks to both low-speed and full-speed USB 1.1 devices, and its driver software is open source, developed as the MicroUSB project.

The first 100 cartridges were sold at a pre-order price of $39.99, rising to $49.99 afterwards.

Specifications

Item Value
Design ABBUC e.V.: Carsten Strotmann, Harry Reminder, Thomas Grasel (hardware and software); label by Florian Dingler
Production Atarimax (PCB design, Atarimax label, manufacturing), 2006
Project start Summer 2002
Connection Cartridge slot; USB host connector
USB Host, USB 1.1, low-speed and full-speed devices
Software Open source (MicroUSB project): HID base driver, developer kit, end-user driver disk, device drivers
Price $39.99 for the first 100, then $49.99

Software and devices

When the cartridge launched, Atarimax described the software as "very early beta", already able to handle keyboards, joysticks, steering wheels and other simple devices. The MicroUSB driver set grew to include:

  • a base HID driver for USB human-interface devices;
  • a USB Device Driver Development Kit disk and an end-user driver disk;
  • a keyboard driver, so a PC USB keyboard can type into the Atari;
  • digital joypad and analog joystick drivers, plus a Logitech Rumblepad 2 driver;
  • steering wheel drivers for the Thrustmaster, Logitech GP and Logitech VP wheels;
  • a driver for the Speedlink Competition Pro USB, the modern USB remake of the classic joystick.

Drivers load from disk and translate USB input into what Atari software expects, such as keyboard codes or joystick and paddle values. Programs written to the MicroUSB interface can use the devices more directly.

Using it today

  • It's a host, not a storage device. The cartridge was aimed at input devices. It isn't a USB flash-drive reader for loading files. For that, use an SD-card or PC-link device instead.
  • Get the drivers. The MicroUSB firmware and driver files are distributed through the project's SourceForge area. Atarimax also ran a community support forum.
  • Device choice. Simple HID devices work best: basic keyboards, digital pads and the supported wheels. Composite or unusual devices may not be recognised.
  • Alternatives. For keyboards specifically, internal PS/2 or USB keyboard interfaces (such as the AKI interface sold by Lotharek) are simpler. The USB Cartridge stays interesting as a general host adapter and a development platform.

Compatibility

Works with Atari 8-bit computers through the cartridge slot (XL/XE in particular). Each device needs a driver, and Atari software sees the device only through that driver's emulation of keyboard or joystick input.

Credits