Video Output and the Monitor Port

Year
1979
Type
Interface
Category
Technical reference — RF, composite, Y/C and RGB outputs
Manufacturer
Atari, Inc. / Atari Corp.
Rear panel of a PAL Atari 130XE showing the round monitor socket, TV jack and other connectors

Overview

Every 8-bit Atari generates one picture and one mono sound channel, but the ways it hands them to a screen differ from model to model. Most machines provide an RF signal for an aerial socket; most also have a monitor port with composite video and audio, and many add separate luminance (Y) and chrominance (C) — what is now called S-video. French machines are a special case with RGB or SECAM outputs for Péritel (SCART) sets. Getting the best picture today is mostly a matter of knowing which signals your particular board provides.

RF output and TV channels

Version Channel Video / audio carrier
NTSC (North America) 2 or 3, by switch 55.25 / 59.75 MHz or 61.25 / 65.75 MHz
PAL I (UK) 36 591.25 / 597.25 MHz
PAL B (much of Europe) 4 (E4) 62.25 / 67.75 MHz
SECAM (France) none No RF output

On the 400 and 800 the RF lead is a cable permanently attached to the back of the case, ending in a phono plug (NTSC) or a Belling-Lee aerial plug (PAL); on PAL machines the side channel switch does nothing. XL and XE machines have a phono "TV" jack and a detachable cable instead. NTSC computers came with a TV switch box; a simple phono-to-F adapter gives a cleaner signal than the switch box.

The monitor port

All models except the 400, the NTSC 600XL and the French SECAM machines have a 5-pin, 180° DIN socket:

Pin Signal
1 Composite luminance (Y) — not connected on the PAL 600XL
2 Ground
3 Audio out
4 Composite video (NTSC or PAL)
5 Composite chrominance (C) — not connected on the 1200XL, NTSC 800XL and early PAL 800XL; ground on the PAL 600XL

So the 800, later PAL 800XLs, 65XE, 130XE and 800XE give full Y/C; the 1200XL and NTSC/early PAL 800XL give luma plus composite but no chroma; the PAL 600XL gives composite only. The XE Game System has two phono jacks (video and audio) instead of a DIN socket. The SECAM 800XL, 130XE and XEGS use a 6-pin DIN carrying SECAM composite, Péritel audio and +12 V for the SCART switching line, and the French Péritel 800 has an 8-pin DIN with RGB.

Atari sold two monitor leads: the CX82 Black & White Monitor Cable (luma and audio, with phono, BNC and UHF adapters) and the CX89 Color Monitor Cable (composite and audio). Atari never made a four-plug Y/C cable, though users soon did.

Which connection to use

  1. Y/C (S-video) where the board provides chroma: the sharpest colour picture. You lose NTSC artifact colours, because luma and chroma never mix.
  2. Composite on every other model with a monitor port. On NTSC machines it shows artifact colours, which some software relies on.
  3. Luma only into a monochrome monitor: crisp 80-column-friendly text, which is why green and amber screens were popular for word processing. The XEP80 adds a true 80-column monochrome output.
  4. RF only if nothing else is available — the 400 and NTSC 600XL have nothing else.

The refresh rate follows the machine: about 59.92 Hz on NTSC, 49.86 Hz on PAL/SECAM. Make sure a modern TV or upscaler accepts 50 Hz before buying a PAL machine for use in North America.

Known issues & tips

  • Upgrades. Video modifications for XL/XE machines (chroma fixes, signal clean-ups, upgrade boards) are covered in separate entries.
  • Colour adjustment. The 800XL and 1200XL have colour-trim pots reachable through holes in the base; on NTSC machines this shifts the palette but not the artifact colours.
  • Audio is on pin 3 of the monitor port and in the RF signal; the 400/800's keyclick and buzzer come from an internal speaker instead, while XL/XE models mix them into the TV sound.
  • Modern TVs can add noticeable display lag, which ruins fast action games; use the set's "game mode" to bypass most of its processing.

Credits