Kermit for the Atari (and Kermit-65)

Year
1984
Publisher
Public domain / freeware (Columbia University Kermit Project; also Antic PD library PD038)
Type
Application
Category
Terminal emulator / file transfer (Kermit protocol)
Developer
John Howard (Jack) Palevich, Jim Dahlberg (v1.x); John R. Dunning (Kermit-65)
Language
Action! (v1.x); 6502 assembly (Kermit-65)
Requirements
Atari 400/800/XL/XE, disk drive; 850 interface with modem (R: handler) or Atari 1030 modem (T: handler)

Overview

Kermit is a file-transfer protocol and terminal program from the Columbia University Kermit Project. Kermit implementations exist for many kinds of computers, so it was a common way to move files between a home computer and larger systems. The Atari 8-bit had two main Kermit programs, both distributed free.

Kermit for the Atari Home Computer (1983–84)

The first port was written by John Howard Palevich (Jack Palevich). Version 1.1 is dated 9 January 1984 and was an official port listed in Columbia's Kermit archive. It offered Kermit uploads and downloads plus DEC VT52 terminal emulation.

Unusually for a communications program, it was released as Action! source code. It compiled into one of two versions:

  • one for the Atari 850 interface with a D.C. Hayes Smartmodem, including auto-dial, using the R: handler;
  • one for the Atari 1030 modem, using the T: handler.

Version 1.2 (Kermit/1030, also seen as KERMIT1030 or KBIN.HEX) was Palevich's 1030 release, and version 1.3 (1984), by Jim Dahlberg, was the Atari/850 release. Antic's public-domain library later distributed the program as disk PD038.

Kermit-65 (1987–1990)

Kermit-65, by John R. Dunning, was a port of the Commodore 64 Kermit-65 program. It added VT100 emulation alongside VT52 or no emulation at all. It also offered three screen choices: the standard Atari 40-column screen, an 80-column pannable virtual screen with 40 columns visible at a time (like VTERM), or an 80-column graphics screen (like VT-10-Squared). Each release came in two forms: K65.COM/KERMIT.COM with a built-in 850 R: handler autoloader, and K65NR.COM/KERMITNR.COM for use with an R: handler already loaded. The FAQ lists releases 3.1 (6 August 1987), 3.3 (20 October 1987), and 3.5, 3.6 and 3.7 (April–May 1990).

Commercial programs also built Kermit in. CDY Consulting's VT100 emulator for its Omniview 80-column chip, later the stand-alone OmniCom, offered Kermit transfers alongside XMODEM.

Using it today

Kermit-65 is the version to choose. Run KERMIT.COM on a machine or emulator with 850 emulation, or load your preferred R: handler first and use KERMITNR.COM. Modern Kermit implementations, such as C-Kermit on Linux, still speak the protocol, so an Atari running Kermit-65 can exchange files with a PC over a serial link or a Telnet "modem". VT100 mode also makes it one of the better Atari terminals for logging into Unix-style hosts.

Credits