UnoCart and A8PicoCart

Type
DIY project
Category
Open-source SD/flash multicart
Manufacturer
Open-source design by Robin Edwards (robinhedwards on GitHub)
Two assembled A8PicoCart circuit boards, each carrying a purple RP2040 Pico-style module above a cartridge edge connector; silkscreen text marks one side 'This side TOP/FRONT' and the other 'This is the BACK/BOTTOM'.

Overview

The UnoCart and its successor, the A8PicoCart, are open-source cartridge emulators by Robin Edwards. Both are built around a microcontroller: a Raspberry Pi Pico on the A8PicoCart, with an SD card holding the files on the UnoCart. From a menu at power-up, one cartridge can stand in for a shelf of ROMs. It can also load executables and, on machines with enough RAM, emulate a disk drive.

The UnoCart came first and is used well beyond hobby circles. For example, the KickC compiler author tested his Atari examples on an "UNOcart A8" in a 130XE and an 800XL. The A8PicoCart moved the design to the Raspberry Pi Pico. It is an easy build using inexpensive Pico clones, and developers who want to produce their own cartridges often start with it.

What it can do

  • Cartridge images. The repository's manual lists the supported cartridge formats, which follow the same naming as atari800's cart.txt. Users report the most reliable results with .CAR files, compared with raw .ROM, .BIN or .XEX.
  • Executables (XEX) load from the menu.
  • Virtual disk drive. On an Atari with at least 64 KB the cart can install a soft OS that redirects D1: to an ATR chosen from the menu, while D2: and up still go to real SIO devices. The UnoCart uses a modified Altirra OS for this; the redirection code is in source/Atari/UnoCartOS/pio.s in the repository.
  • Big cartridge software. Users run SpartaDOS X from the PicoCart, for example an SDX442_MAXFLASH1.car image, and keep MAC/65, Atari BASIC revision C and other language cartridges on it as a development setup.

Building one

Both projects are published on GitHub under robinhedwards, and the repository manuals are the build references. The A8PicoCart is the simpler of the two because the processor comes as a ready-made, inexpensive Pico board, often a clone, on a cartridge PCB. Expect to solder the Pico and the edge-connector board, flash the firmware, and add a cartridge shell. Many people 3D-print one; Sikor Soft also sells new cases in the Atari XE style.

Tips and gotchas

  • FujiNet plus SpartaDOS X: SDX booted from the cart sees only part of FujiNet's drives. The cure in the FujiNet quick-start guide is a "double boot": boot FujiNet first (the PicoCart menu has an X option for this), then load the SDX image from the PicoCart menu.
  • The disk emulation needs 64 KB and a soft OS, so it won't suit software that installs its own OS or needs RAM under ROM.
  • For RAM-hungry or highly compatible setups (SIDE2/SDX emulation, ATX images), commercial carts like the AVG Cart or SIDE3 go further. The Pico carts win on price and hackability.

The Pico on the SIO side: A8PicoSIO

A different project, A8PicoSIO by Wojciech Mostowski (woj76, 2024–), uses a Pico as an SIO device instead. It offers four drives and C:, ATR read/write, ATX reading with accurate 810/1050 timing modes, CAS and WAV tape images including turbo systems such as Turbo 2000 and Turbo 6000, and separate PAL and NTSC baud rates. A PicoCart and an A8PicoSIO together make a complete, very cheap modern storage setup.

Credits