PTODT Stereo and Stereo II

Year
2022
Type
Modern device
Category
Dual-POKEY stereo upgrade (internal)
Manufacturer
kkrys, for PTODT (Polish Society for the Preservation of Technical Heritage); sold via AtariFan.pl
Blue PTODT stereo board with two empty 40-pin POKEY sockets on top and pins underneath to plug into the Atari's POKEY socket

Overview

PTODT Stereo (November 2022) and PTODT Stereo II (December 2023) are internal stereo sound upgrades for Atari XL/XE computers. They were designed by kkrys, a member of PTODT, the Polish Society for the Preservation of Technical Heritage, and sold through the AtariFan.pl shop to support the society. Like the classic stereo upgrades going back to Chuck Steinman's 1989 POKEY Stereo Upgrade, the board plugs into the POKEY socket and carries two POKEY chips, giving the left and right channels used by stereo music and demos. kkrys drew on several earlier designs (mega-hz's Stereo Erweiterung, Pasiu's and Raster's stereo boards and TK-II-Stereo), aiming to keep their strengths and avoid their weaknesses. The boards add three things most earlier stereo boards lacked:

  • a fast, click-free automatic mono/stereo switch;
  • the GTIA "bell" (keyboard click and GTIA music) mixed in;
  • on Stereo II, SIO audio and PBI/ECI audio as well.

Specifications

Item PTODT Stereo (2022) PTODT Stereo II (2023)
Designer kkrys (PTODT) kkrys (PTODT)
Released November 2022 December 2023
Price (AtariFan.pl) 90 PLN / €21 130 PLN / €30
POKEYs Sockets for two (not supplied); works with one in mono Same
Audio sources Both POKEYs + GTIA bell Both POKEYs + GTIA + SIO audio + PBI (XL) or ECI (XE) audio
Mono/stereo Automatic Automatic, or Mono / Autostereo / Stereo with an optional 3-position switch
Wiring 3 wires to the motherboard + 3 for the audio output 5 wires to the motherboard + 3 for the audio output; two motherboard capacitors removed
Output Left, right and ground to RCA or 3.5 mm jack Same

How it works

The board takes the POKEY's place. The original POKEY goes into one of its sockets and a second POKEY into the other. A wire to the A4 address line, taken from a pin of the BASIC ROM chip, lets the board decode the second POKEY at $D210, the standard stereo address. A second wire picks up the GTIA bell output (GTIA pin 15), and a third feeds the mixed sound to the Atari's own audio amplifier, so the TV still gets sound. Separate left and right outputs go to new sockets.

The auto-stereo circuit watches the right-channel POKEY. The moment it produces sound, the board switches to stereo. It only drops back to mono after about 20-30 seconds of silence on the right. That's deliberate: some stereo tunes play on one channel for a while, and boards that switch back instantly spoil the effect. The switching itself is designed to be free of clicks and pops. In mono, both outputs carry the same signal, rather than the left-only output of some older boards, which is better for headphones. kkrys also designed his own amplifier stage with a carefully chosen feedback loop and no band-limiting filter capacitors, aiming for clearer sound.

Stereo II also takes the SIO audio line, so you hear cassette and disk-drive signals and SIO devices that send audio, and the PBI or ECI audio line, for sound from parallel-bus devices. It needs two motherboard capacitors removed to avoid whistles from signal coupling.

Installing and using it

  1. Remove the POKEY (desolder it if it isn't socketed). On 600XL/800XL boards with the thicker keyboard, an existing socket may need removing so the board fits.
  2. Fit one or two POKEYs into the board's sockets and solder or plug the board into the motherboard.
  3. Wire the motherboard connections (three for Stereo, five for Stereo II) and the three output wires to your chosen sockets.

Neither board comes with POKEY chips or hook-up leads. PTODT recommends having a qualified person install Stereo II, since it involves more soldering. With one POKEY the board still works: mono tunes play in both channels, and stereo tunes play their left channel in both.

Compatibility

Atari XL/XE computers made from 1983 to 1992. It works with all dual-POKEY software that uses the standard second POKEY at $D210, such as stereo trackers, players and demos. The GTIA, SIO and PBI/ECI audio paths keep keyboard clicks, tape sounds and peripheral audio in the stereo mix.

Credits