Myotis Apprentice Robot Arm Kit (and the Armatron Hack)

Year
1983
Type
Peripheral
Category
Robot arm kit with Atari interface and ROBIX control language
Manufacturer
Myotis Systems (Tucson, Arizona)

Overview

In 1983 robots were the next big thing for home computers, and the Atari's joystick ports made it an easy machine to experiment with. The Apprentice from Myotis Systems of Tucson was one of the few complete robot-arm kits sold with an Atari interface. Antic reviewed it in July 1983 at $295 for the full kit. The reviewer, a professional programmer, had always wanted to build a robot but lacked the mechanical skills.

The box held ten bags of parts (tubes, cables, motors, gears, rods and many small fittings), plus manuals, disks and bumper stickers. Assembly took him about 40 hours over three weeks. He reckoned a skilled builder could do it in a third of the time. He praised the assembly manual as "very well written" and Myotis's phone support, which posted replacement parts free of charge.

How it's built

Feature Detail
Frame Aluminium tubing originally made for hunting arrows
Actuators Hobby servos: small boxes with a motor, gear train and feedback potentiometer that reports the shaft position to the computer
Axes Four degrees of freedom: base rotation (friction drive), shoulder and elbow (servo arms driving pushrods) and gripper (cable-operated). A linkage keeps the hand pointing down
Reach Lifts objects of a few ounces within a radius of about a foot, accurately enough to pick up small objects repeatedly from the same spot
Software ROBIX, a simple robot-control language supplied as a compiled Forth program. It records a sequence of arm positions and plays them back, or moves the arm from the keyboard. Listings of the machine-language drivers were available
Computer Atari 800 (reviewer's system)

The reviewer wanted two more motions, wrist flexion and wrist rotation. Myotis sold parts for the first; the second looked harder. The kit's real strength was that it could be rebuilt: the parts didn't fit together in only one way, and it could even be taken apart and made into something else. He added a counterweight behind the shoulder to balance the faster downward movement and lift heavier loads. That made the base harder to stop turning, and the rotation servo started to overshoot and "tremor", a small lesson in feedback control. He found ROBIX too limited for that kind of tuning. Myotis promised a more advanced robot language embedded in Forth.

His verdict: if you want a robot to fetch your slippers, wait twenty or thirty years. If you want an Atari peripheral that gives many hours of tinkering and teaches you about dynamic systems and feedback, consider the Apprentice.

The Armatron hack

A cheaper route came from ANALOG Computing. Its article "Arm Your Atari" showed how to connect Radio Shack's Armatron toy arm, normally worked by hand, to an 8-bit Atari. The arm's position was read through the paddle (potentiometer) inputs, and its motors were switched through the PIA joystick lines. David Paterson's 1996 hardware FAQ lists it among the "other neat stuff" built for the Atari.

Building your own today

The ideas still work. A joystick port gives eight PIA lines that can generate servo pulses, and the paddle inputs can read potentiometers for feedback. Antic's own tutorials are a good starting point: see joystick-port RC servo control, stepper-motor robot controller and joystick-port interfacing. Keep a common ground between the arm's power supply and the computer, and use a separate supply for the motors. Servos can draw far more current than a joystick port provides.

Credits