Atarimax MyIDE-II CompactFlash Cartridge

Year
2012
Type
Modern device
Category
CompactFlash interface and multicart (cartridge slot)
Manufacturer
Atarimax (Steven J. Tucker); MyBIOS by Sijmen Schouten (Mr-Atari)
Four MyIDE II cartridges in translucent green, clear, red and blue cases with Atarimax MyIDE II labels

Overview

The MyIDE-II is Atarimax's 2012 redesign of the MyIDE hard-disk idea for XL/XE computers. Sijmen Schouten's original MyIDE (1999-2006) was a do-it-yourself IDE interface. Atarimax's earlier MyIDE+Flash (2006) put it in a cartridge. The MyIDE-II is a completely new design built around a CompactFlash socket, with 512 KB of user flash, 512 KB of SRAM, a JTAG-upgradable logic core, software power control and hardware media-change detection. It does two jobs at once:

  • it's a hard disk, running Schouten's MyBIOS ROM, which presents partitions of the CF card as disk drives, now with full hot-swap support;
  • it's a multicart and loader: the bundled Atarimax FAT32 Loader reads a PC-formatted CF card and runs .XEX/.COM files, mounts ATR disk images (buffered in the cartridge's SRAM for speed), and loads converted XEGS and bank-switched cartridge images.

The cartridge sold for $69.95 in translucent clear, red, blue or green cases. The first production run was limited to 100 units.

Specifications

Item Value
Maker Atarimax (Steven J. Tucker), 2012; MyBIOS © Sijmen Schouten, used under licence
Computers Atari XL/XE (and XEGS)
Storage CompactFlash, 8-bit ATA register interface at $D500-$D507
Flash 512 KB, user-customisable via Maxflash Studio "workbooks"
SRAM 512 KB application RAM
Banking Two windows: $A000-$BFFF (register $D508) and $8000-$9FFF ($D50A), each selecting one of 64 × 8 KB banks from flash or RAM; plus a 128-byte "keyhole" window at $D580-$D5FF
CF control $D50E: power and reset; status bits for card present, power and reset
Indicators Green LED when the CF card is powered
Upgrades Boot ROM from the CF card or via the Maxflash USB programmer; logic via card-edge JTAG
Price $69.95 (launch)

How it works

The CF card's ATA registers appear at $D500-$D507, using 8-bit transfers only. The alternate register set is also reachable, so software can soft-reset the card. A write-only control register at $D50E powers the card up and brings it out of reset. It needs a rising edge on each bit, so the correct sequence is $00, then $02, then $03. Pulling the card cuts its power automatically, and the status bits let MyBIOS notice a new card: that's the hot-swap feature.

The two cartridge windows can each show any 8 KB of either the flash or the SRAM. That's how the FAT32 loader buffers a whole ATR image in RAM and how converted cartridge images run. The 128-byte keyhole at $D580 gives software a small, finely banked view into the big memory without disturbing the main windows.

Using it today

  • Two ways to use a card. For MyBIOS hard-disk use, partition the card with the MyIDE tools and run SpartaDOS, MyDOS or another large-volume DOS. Jonathan Halliday's SpartaDOS X drivers for MyIDE/Flash, internal MyIDE and MyIDE 2 are available. For quick loading, put XEX and ATR files on a FAT32 card and use the loader.
  • Customise the menu. Maxflash Studio workbooks let you change the boot flash contents and menus, and the USB programmer makes updates quick.
  • Emulation. Altirra emulates the MyIDE-II, including its CF power and reset behaviour and save states, so you can prepare a CF image on the PC first.
  • Card choice. Atarimax sold ready-configured CF cards of 1 GB and up. If you prepare your own, test it with both the loader and MyBIOS before relying on it.

Compatibility

All XL/XE computers via the cartridge slot. It doesn't need the PBI, so it also works on XE machines without an ECI adapter. Software that writes to the $D5xx cartridge-control area may conflict with it.

Credits