Atari CX77 Touch Tablet
- Year
- 1984
- Type
- Peripheral
- Category
- Graphics tablet (joystick port)
- Manufacturer
- Atari, Inc.
Overview
The CX77 Touch Tablet turned the Atari into a drawing machine. Its pressure-sensitive surface reports where you are pressing, and the on-screen cursor follows: lift the stylus and the white crosshair cursor vanishes; press again and it reappears. Atari's owner's guide stressed that you can draw "with just about anything" — the supplied stylus, an ordinary pen, or a finger — and a clear plastic overlay protects the surface and lets you trace a picture slipped underneath it. There are three buttons: one on the stylus and one on each side of the tablet (for left- and right-handed users). The right-hand button can be latched on for freehand drawing.
The tablet connects to controller jack 1 and is read the same way as a pair of paddles: its horizontal and vertical positions come through the two POKEY pot lines, and its buttons on the joystick direction lines. The guide notes that it can stand in for paddles in some games.
It came with AtariArtist, a cartridge version of Island Graphics' Illustrator program (the same family as the KoalaPad's Micro Illustrator), offering 128 colours, eight brush widths, 12 fill patterns, circles, boxes, discs, rays, mirror drawing, fill and a zoom mode, with pictures saved to disk or cassette.
Specifications
| Item | Detail |
|---|---|
| Size | 7.5 × 9.5 × 1.25 inches; drawing surface 5 × 6.5 inches |
| Buttons | Stylus button plus left and right tablet buttons (tablet buttons cannot be read independently) |
| Interface | Joystick port (jack 1 for AtariArtist): position on POKEY pot lines, buttons on PIA lines |
| Bundled software | RX8053 AtariArtist cartridge; Atari DOS 2.0S master diskette (CX8104) |
| Manual | The Atari Touch Tablet With AtariArtist Software Owner's Guide C061794 |
| Industrial design | Tom Palecki |
History
Atari previewed the Touch Tablet at the June 1983 CES with a cassette-based graphics program, and promoted it in Europe in late 1983, but it shipped in the U.S. in winter 1983–84, introduced with AtariArtist in January 1984. It stayed in Atari Corp.'s line into 1985, featured at European shows alongside the 130XE. The popular KoalaPad from Koala Technologies is a close cousin, but the two are slightly incompatible: the vertical (Y) readings run in opposite directions, so some software needs a patch or setting to work with the Atari tablet.
Software
Beyond AtariArtist, the tablet is supported by Broderbund's The Print Shop and Print Shop Companion, XLEnt's Rubber Stamp and Typesetter, Reeve Software's Diamond GOS desktop and its applications, RAMbrandt, Simon Trew's Multi-Mouse driver (New Atari User #42, 1990) and games, and many later programs including the Contiki OS package, PLATOTerm, Dye (2016) and Xirius Defect (2013). Antic published a "Touch Tablet Cursor" demonstration in January 1985.
Using it today / Known issues & tips
- Use the overlay and moderate pressure. Atari warned that pressing too hard can tear the overlay or damage the surface, while too light a touch interferes with cursor movement.
- Two touches average. Pressing two points at once puts the cursor midway between them; a blunt tool registers at the centre of the contact area.
- KoalaPad software may draw upside down unless it supports the Atari tablet.
- Emulation. Altirra can map a modern mouse or pad to the tablet inputs.
Credits
- Picture: Atari CX77 Touch Tablet with stylus. — Terry Ross from Corpus Christi, Texas, United States, via Wikimedia Commons (CC BY-SA 2.0)
- comp.sys.atari.8bit FAQ (Michael Current) — Michael Current (comp.sys.atari.8bit FAQ)
- Altirra emulator home page and change log — Screenshot from Avery Lee's Altirra page, virtualdub.org
