The Atari 5200 and the 8-Bit Computers
- Year
- 1982
- Type
- Computer
- Category
- Related system — the 8-bit chipset as a games console (1982)
- Manufacturer
- Atari, Inc.
- Tags
- atari-inc, 5200, supersystem, console, antic, gtia, pokey, conversion, porting, related-system
Overview
The Atari 5200 SuperSystem (1982) was Atari's successor to the 2600 VCS, and inside it is essentially an 8-bit Atari computer. It uses the same custom chipset — the SALLY 6502, ANTIC, GTIA and POKEY — so its graphics and sound are those of a 400/800. Yet a 5200 cartridge will not fit a computer, and a computer program will not run on a 5200. In 1983 Antic answered a reader who hoped to use 5200 cartridges in an 800: "No. They don't fit," adding that the joystick handling alone was very different.
What is the same
- Chips: a 6502 with ANTIC's display lists, character and bitmap modes, player/missile graphics, colour registers and POKEY's four-voice sound all working exactly as on the computers.
- ANTIC sits at the same
$D400addresses, so display lists move across unchanged. - Programming style: most 400/800 cartridge games already bypassed the OS and wrote to the hardware directly, which is why the two libraries overlap so much.
What is different
| 400/800/XL/XE | 5200 | |
|---|---|---|
| RAM | 8–64 KiB (more with upgrades) | Fixed 16 KiB at $0000–$3FFF |
| Cartridge | 8 or 16 KiB at $8000–$BFFF (more with banking) |
Up to 32 KiB at $4000–$BFFF, separate from RAM; different connector |
| GTIA address | $D000 |
$C000 |
| POKEY address | $D200 |
$E800 |
| PIA | 6520 for joysticks and banking | None |
| OS | 10–16 KiB with BASIC-friendly I/O, floating point, device handlers | 2 KiB "BIOS" at $F800, half of it the character set; no standard vectors |
| Storage | Cassette, disk via SIO | None in the base system (SIO lines only on the expansion port) |
| Controllers | Digital joysticks via PIA; paddles via POKEY | Analogue sticks via POKEY pot lines; 12-key pads and Start/Pause/Reset scanned by POKEY's keyboard logic; top button on the SHIFT/BREAK line |
| Power | Cartridge inserted at any time | Removing the cartridge cuts the power |
The 5200's controllers explain much of the porting effort. Its analogue sticks don't self-centre, so software must calibrate them; all four keypads are multiplexed onto POKEY's keyboard scanner, selected through GTIA's CONSOL lines; and there is no PIA at all. Computer games expect digital joysticks on PORTA.
History
The two lines were always linked. Atari's preliminary product specification for the 600 says the FREDDIE memory chip, then called "FRED", was also meant to make possible a low-cost external 5200 adaptor for the coming 600XL and 800XL — an idea that never reached the shops. Later, Atari Corp.'s XE Game System (1987) delivered the opposite: a games console that was an 8-bit computer and ran its cartridges and disks directly.
Porting today
- 5200 to 8-bit. The computers cannot run 5200 binaries directly, but practically the whole 5200 catalogue, old and new, is available on them in converted form — ported by hobbyists from the 1980s onwards (Glenn "The 5200 Man" among the early ones) and more recently by groups such as Homesoft and Fandal. Converting means relocating GTIA and POKEY accesses, replacing the BIOS calls and start-up code, and rewriting controller handling for digital joysticks.
- 8-bit to 5200. Harder: the program must fit in 16 KiB of RAM and a 32 KiB cartridge, and can use no OS services such as disk I/O or BASIC-style screen output.
- Same machine, different cartridge? No: neither the connector nor the cartridge header and memory map are compatible.
- Emulation: Altirra and Atari800 both emulate the 5200 as a separate machine type.
Credits
- Picture: A four-port Atari 5200 SuperSystem with Pac-Man. — Evan-Amos, via Wikimedia Commons (Public domain)
- Altirra Hardware Reference Manual — Chapter 13, 5200 SuperSystem (differences, controller, memory map) — Avery Lee (Altirra)
- comp.sys.atari.8bit FAQ (Michael Current) — 1.1 (relationship), 1.12 (FREDDIE/'FRED' and the planned 5200 adaptor), 8.4 (Homesoft/Fandal conversions) — Michael Current (comp.sys.atari.8bit FAQ)
- Antic vol. 2 no. 4 (July 1983), I/O Board — '800 vs. 5200' — AtariMagazines.com (Kevin Savetz), 1983
- AtariAge forum — How close is the 5200 hardware ... to the Atari 400 and 800? (2019) — AtariAge forum members, 2019
- AtariAge forum — Does the Atari 800 play Atari 5200 games just like an 800 game? — AtariAge forum members
- AtariAge forum — converting 5200 ports to 8-bit (and vice versa) — AtariAge forum members
