Atari 130XE

Year
1985
Type
Computer
Category
Home computer (XE series, 1985)
Manufacturer
Atari Corp.
Grey Atari 130XE computer

Overview

The 130XE was the high-end model of the XE range Atari Corp. introduced at the January 1985 CES, and the first 8-bit Atari to ship with more memory than the 6502 can address directly: 128 KiB in total (126 KiB usable). It is otherwise a 65XE — XL operating system and Atari BASIC in ROM, one cartridge slot, two joystick ports, SIO — housed in the same grey XE case, and Atari stated that any software not using the extra memory would be fully compatible with the 65XE and 800XL. It was also the machine that introduced the Enhanced Cartridge Interface (ECI), the 14-pin extension next to the cartridge slot that replaced the XL's Parallel Bus Interface.

How the extra 64K works

The second 64 KiB is divided into four 16 KiB banks that appear, one at a time, in a window at $4000–$7FFF. Four previously unused bits of PIA port B ($D301, PORTB) control it: bits 2–3 choose the bank, bit 4 (CPU Bank Enable) makes the 6502 see the extended bank, and bit 5 (Video Bank Enable) makes ANTIC fetch display data from it. Because the two enables are independent, Antic's July 1985 technical preview described four modes: compatibility (both see main RAM), CPU-extended (program data in the bank, display in main RAM), video-extended (ANTIC shows a bank the CPU cannot see) and fully extended.

Bill Wilkinson warned Antic readers in 1987 that PORTB is "very, very easy" to misuse: switching away the bank your code sits in, disabling the OS ROM just before an interrupt, or even upsetting the carrier-detect line of a 1030 or XM301 modem.

Specifications

Item Atari 130XE
CPU Atari SALLY 6502 (C014806)
Custom chips ANTIC "E" (NTSC) / "B" (PAL, SECAM) with 9-bit refresh for 256K DRAMs; GTIA or FGTIA (SECAM); POKEY; 6520 PIA; FREDDIE
RAM 128 KiB (64 KiB main + four 16 KiB banks)
ROM 16 KiB XL OS (Rev. 2 most units, Rev. 3 late) + 8 KiB Atari BASIC Rev. C
Expansion Cartridge slot + Enhanced Cartridge Interface
Controller ports 2
Video out RF (NTSC channel 2/3 switch); 5-pin DIN monitor port; SECAM: 6-pin DIN for SCART and a colour/mono switch
Power 5 V DC, 1.0 A (Antic's 1985 preview quoted 1.2 A)
Manufactured Atari Taiwan Manufacturing Corp.; late 1991–92 units in China

History

Atari previewed the 130XE as "well under $200" in January 1985. It shipped in the U.S. at the end of March 1985 at $149 — before the 65XE — then in the UK on 22 April 1985 (£169.90), Italy (L. 380.000) in May, and France (SECAM, 1,990 F) in June. In January 1986 Atari offered a $399 U.S. bundle with a 1050 drive, 1027 printer and software, and the UK later sold a 130XE Starter Pack with an XC12 recorder, joystick and a five-game compilation tape. In its December 1991 10-K, Atari described the 130XE as generally selling for under $150; it remained in production for export markets into 1992.

Using it today / Known issues & tips

  • The RAM disk is the easy win. Atari's DOS 2.5 includes a RAMDISK.COM utility that sets up the extra memory as a 64 KiB RAM drive, D8:, and copies DUP.SYS there so the DOS menu loads instantly; Atari's later DOS XE also supports the 130XE RAM drive.
  • The "130XE-compatible" standard. Dozens of later XL/XE RAM upgrades advertise 130XE compatibility, meaning they reuse this PORTB bank layout, so software written for the 130XE banks runs on them.
  • ECI devices fit only the 130XE, 800XE and later 65XEs; PBI devices need an adapter.
  • Colour is adjustable through the hole in the base (R38).
  • Emulation. Altirra emulates the 130XE as a distinct hardware model.

Credits