Atari 1200XL
- Year
- 1983
- Type
- Computer
- Category
- Home computer (XL series, 1983)
- Manufacturer
- Atari, Inc.
Overview
The 1200XL was Atari's attempt to replace the 800 with a modern, cheaper-to-build machine. Introduced at New York's Plaza Hotel on 13 December 1982 and shipped in March 1983, it put a full 64 KiB of RAM (62 KiB usable), a new 16 KiB XL operating system and all the electronics onto a single circuit board inside a low, lid-less case. Internally it went through code names such as "Z800", "Sweet-16"/"S-16", "1000X" and "1200X".
It introduced the XL design language and many features later machines kept — the HELP key, the built-in Self Test, the international character set, OS support for the "hidden" ANTIC modes 4, 5, 12 and 14 — but it also dropped things owners valued: controller ports 3 and 4, the second cartridge slot, Memo Pad mode and the +12 V/+5 V power on the SIO port. Combined with some 400/800 software failing under the new OS, the reception was cool, and production ended after only a few months.
Specifications
| Item | Atari 1200XL |
|---|---|
| CPU | Atari SALLY 6502 (C014806), 1.79 MHz (NTSC only) |
| Custom chips | ANTIC (C012296), GTIA (C014805), POKEY, 6520 PIA |
| RAM | 64 KiB (62 KiB usable) |
| ROM | 16 KiB XL OS Rev. A (C060616A + C060617A); service upgrade to Rev. B from September 1983. No built-in BASIC |
| Keyboard | Full-stroke; top row of 11 keys: RESET, START, SELECT, OPTION, F1–F4, HELP, inverse, BREAK |
| Indicators | Two LEDs: L1 = keyboard disabled, L2 = international character set |
| Cartridge slots | 1 |
| Controller ports | 2 |
| Video out | RF jack with switch box (channel 2/3); 5-pin DIN monitor port (pin 5 chroma not connected) |
| Sound | POKEY; keyclick routed to TV/monitor speaker |
| SIO | Pin 12 not connected; pin 10 is Ready only (no +5 V) |
| Power | 9 V AC (CA014748 or CA017964); 31 VA (about 19 W) |
| Manufactured | Sunnyvale, CA (Jan – May 1983); Atari Taiwan Manufacturing Corp. (Apr – Jul 1983) |
History
At the January 1983 CES Atari confirmed a U.S. list price of $899, the same as a 16K 800 had cost a year earlier. Antic's February 1983 preview, written by an Atari staffer, emphasised the redesigned colour circuitry ("a 2:1 color saturation improvement over the 400/800"), the wider audio bandwidth, the redefinable keyboard, and the fact that cartridges could be swapped without damaging the machine. On 1 June 1983 the price was cut to $549, and the June CES introduced the 600XL and 800XL, which kept the 1200XL's look but added built-in BASIC and a Parallel Bus Interface; Antic reported that the 1200XL would remain "the only member of the family without built-in BASIC". It was not released in Australia, and production ended in July 1983. The Yankee Group estimated U.S. home sales of 50,000 units during 1983.
Engineering came partly from Atari's New York lab (project manager Gregg Squires, principal engineer Bob Card) and partly from California, where Ajay Chopra was system architect and author of the product specification; Regan Cheng designed the case. The XL OS Rev. A ("Rev. 10") was completed on 26 October 1982, with Harry Stewart, Lane Winner, Scott Scheiman, Amy Chen and Mike Colburn among its programmers.
The function keys
F1–F4 move the cursor (up, down, left, right); with SHIFT they jump to the screen corners and line ends. CONTROL+F1 toggles the keyboard lock, CONTROL+F2 switches ANTIC screen DMA off and on (making programs run faster), CONTROL+F3 toggles keyclick, and CONTROL+F4 switches the domestic/international character set. HELP on the rainbow "ATARI" logo screen enters Self Test; there is also an internal option jumper that forces Self Test at power-up. One documented Easter egg: running "all tests" makes the keyboard test type out the programmer's name.
Using it today / Known issues & tips
- SIO power. Devices that draw power from SIO pin 10 (the XC11/XC12 recorders, the XM301 modem) do not work on a stock 1200XL. The documented fix is to replace resistor R63 (100 Ω) with a 0–1 Ω part or a jumper.
- 400/800 software. Programs that use page 3 workspace, poke OS variables such as $3F8, or jump directly into the old OS ROM can hang. Atari's Translator disk loads the 400/800 OS into RAM under the XL ROM to run them; third-party OS replacements do the same job.
- Adjustments. Colour (VR1) and the RF audio carrier (L11) can be tuned through small holes in the base.
- OS identification.
PEEK(64728)returns 76 on any XL OS;PEEK(65527)returns 10 for Rev. A or 11 for Rev. B. - Emulation. Altirra supports a dedicated 1200XL hardware mode and auto-detects the 1200XL Rev. 11 OS ROM.
Compatibility
Everything that runs on an XL/XE computer and does not need built-in BASIC, the PBI or extended memory runs on the 1200XL. Atari BASIC must be supplied as a cartridge.
Credits
- Picture: The Atari 1200XL (1983). — TCMI_Atari1200XL.jpg: Daniel Schwen, via Wikimedia Commons (CC BY-SA 3.0)
- comp.sys.atari.8bit FAQ (Michael Current) — sections 1.4, 1.15, 1.16, 7.1.1, 7.1.7, 7.1.9, 11.1 — Michael Current (comp.sys.atari.8bit FAQ)
- Antic Vol. 1 No. 6 (Feb 1983) — Inside Atari: Atari 1200XL, the New Computer (Levon Mitchell) — AtariMagazines.com (Kevin Savetz), 1983
- Antic Vol. 2 No. 4 (Jul 1983) — XL Line Debuts Design Line for Atari — Atari publicity photo as printed in Antic Vol. 2 No. 4 (July 1983), via atarimagazines.com (Unknown, used for identification), 1983
- Altirra emulator home page — Screenshot from Avery Lee's Altirra page, virtualdub.org
